Stu Summer
100 W
My BBSHD runs for 7 seconds, then stops. It runs only at one even speed, regardless of how far the throttle is turned. It will only run again if turned off and then back on. And then only for 7 seconds again. The “crank” image comes on after the motor runs. It turns back off when the system is cycled off and then on again.
The brake cut-offs are not connected. There is no shift sensor. The speed sensor shows the speed of the wheel turning accurately.
Why is this and how can I fix it?
Thanks!!
The brake cut-offs are not connected. There is no shift sensor. The speed sensor shows the speed of the wheel turning accurately.
Why is this and how can I fix it?
Thanks!!