bentstrider83
10 mW
So, I had a major malfunction with my BBS02 a month ago. I replaced the worn, secondary reduction gear and that still didn't change the issue. That being the motor not being able to run properly when using either regular pedaling, or pedal-assist.
The next thing I'm about to replace would be the nylon gear and the possibly worn bearing in there. On top of that, I'm putting in a new pinion gear bearing. I removed the pinion gear bearing using light hammer taps and a blunt screwdriver to push the bearing out. Now to get it back in. I'm deadlocked on that one.
The next thing I'm about to replace would be the nylon gear and the possibly worn bearing in there. On top of that, I'm putting in a new pinion gear bearing. I removed the pinion gear bearing using light hammer taps and a blunt screwdriver to push the bearing out. Now to get it back in. I'm deadlocked on that one.