Recent content by Akita

Tongsheng TSDZ2 36V 250W Mid Motor + Accessories with Break Coaster with V2 controller. Tongsheng display VLCD5 https://enerprof.de/en/motor-kits/display-parts/tongsheng/737/tongsheng-display-vlcd5-with-controll-part

Same error for me with TSDZ2 v2. I moved the magnet away so it had no function. Now I get help over 25 km/h but the downside is that it doesn't show speed and odometer

I have done it. No change.

I have V2 and tried to change speed with VLDC5 but failed. For me, the engine pulled well up to about 20 km/h but never really good to 25 km/h. I moved the magnet away so it did not affect and now I have power from the engine all the way up to 25 km/h and even more if I want. This at the...

No pedal force TE = 85. With pedal force, TE increases. Previously, only TE was for pedal force control.

Under load, TE1 = 0. The value does not change.

I have a V2 control unit.

No pressure on the pedal.

Thanks! Works perfectly. TE = 85 and TE1 = 0

Press power and i buttons simultaneousfor 10 seconds under ODO menu, then only press to show “ODO”, “TRIP”, “AVG”, “TIME”, “TE”and “TE1”respectively. Does not work. Display turns off. What am I doing wrong?

Does not stand on the pedal at any time. Maybe wait longer after I put on the display.

As I wrote before when I moved the magnet so it came outside the sensor and set the display speed "limit to off", I got engine power over 25 km/h. Now I have noticed that sometimes it seems that the engine power has different positions when I start. If I off display = off and battery = off...

I'll test tomorrow. I have the latest engine and there is no firmware other than the original yet. EDIT: Does not work without a magnet. Put the magnet back and then the motor does not work again. The speedometer showed speed but no power from the engine. OFF - ON without result. Now to the...

Have not tried. Can I use without a magnet. Strange? I have the latest version and firmware 5.0

Have I done. Otherwise I can not change Sd.