eee291

Sorry for the delay, here are my settings.

Thank you. The project is a little bit lacking due to vacation and other commitments, but I can share my modified VescUart. It downloads...

I'll check my settings to compare tomorrow. There might be something else that is causing a problem, like some hall/motor/poles setting...

Spin the motor by hand and check if all 3 halls are showing up, it should read 0 or 1. They should cycle when turning the motor.

Go into monitor and check how much TPS is actually seen on the controller. Also check for voltage drop and current in the program. If...

This should do what you want it to. Just found this amazing item on AliExpress. Check it out! €66.46 30%OFF | 8A 48V 58.4V 72V 60V...

Ah, my mistake. Reading the datasheet more closely I can see that only the "A" type has both the current and voltage adjustments. The...

Also, 12S lipo matches exactly with 14S life, so looking for 12S chargers on Ali will give you what you want.

Most vendors on Ali can change the voltage on their chargers for you. A few chargers also have internal potentiometers. Another option...

Does the throttle stop working when the brake is pressed? If it does, then you need to enable regen or EABS in software.

I rode on Thursday without problems, but didnt ride this weekend. I hope it is alright now. I changed front wheel and noticed the...

Well the journey is nearing completion … I worked with the local trades school and they machined the bearing host / adapter plate and...

Looks like you will need to replace one or more bad cells from the pack.

I occasionally help out a couple of motorsport teams. They obsess over wiring harness' because problems with them are hard to resolve...

I saw that there was practice at a track nearby yesterday, and decided I wanted a revenge from the day before. I fixed the chain issues...