Recent content by Golden Motor Canada

I believe it is the three hall sensors and positive and negative on the 5v system. Gary

The controller is newer with Bluetooth for android 4.4 connection. v4 is being phased out as we don't make the v4 controllers anymore. Gary

Pictures are fine but hardly nessasary. As stated above the kit washers are not intended to fit inside the freewheel. The Smart pies are intended for 5-7 speed freewheels. If you are using a freewheel greater the 7 speed then that is why you are having issues. If you watch the first 5 minutes of...

The washers I source from Grin. They are better then the ones from China and fit in the freewheel easily. Grin charges $5 CAD for them I only charge $4. Basically I am selling them at my cost. I will Need to correct that in the future...

I don't recognize any of these controllers. If they are golden motor they are before my time. When I signed on to GM I had heard the magic controllers were new but I have no experience with anything prior to my time. I'm only guessing but I dont think they are GM controllers. I do see plugs I...

There are slight differences in case size for various packs. I measure the screw holes on the new lifepo4 packs at 73x139mm center of hole to center of hole. So I don't think they would fit unless you want to glue or duct tape them on. I may have some older ones around but I will have to do some...

What controller do you have. Is it the silver square one from Golden Motor? Gary

Keep plucking those spokes to see if any loosen. It's an easy method to see how things are going before rides. It maybe to late to say but a small piece of tape on the one that came loose makes it easy to monitor that one individually. Gary

Its a brushless motor and you need to hook it up using a controller. You cant just hook the battery directly to the motor. Do you have a controller? Gary

I guess you are being so critical as I didn't want to continually answer your private messages on this thread and asked you to post them here as it is related. If you watched the video instead of jumping through it, I did miss speak saying 30 spokes but shortly after that said 36 many times. I...

Sorry to hear of this. These wheels are built by machine in about 2 seconds. I have seen the video and was amazed by it. At that point the wheel is straight and spokes are all tight and at the same tension. When you first ride the bike it is possible for the spokes to re-seat and some can come...

That is definitely a golden motor 48v12ah battery. I recognize it easily from the bms and the cells. These batteries were a nightmare with a real high failure rate. It seems the experts here know much more about it than I do so certainly listen to what they have to say. You should stop using...

The Regen issue you are referring to was resolved. It was a faulty brake lever. http://goldenmotor.com/SMF/index.php?topic=5639.msg32038#msg32038 Gary

I was thinking about the speed for the 20 inch. I guess you could take the speed on a 26 inch wheel and do something like this to calculate the speed of a 20 inch wheel. Lets say the 26 inch goes 45 KPH. 26 x 3.14 = 81.64 20 x 3.14 = 62.8 62.8 / 81.64 = .769 .769 x 45 = 34.605 The 20 inch...

If you bought a kit from me and the regen is not working send it back, I'll send you another one that does work. Its no problem at all. I have experienced no water issues from any customer at this point. Peaks around 1500 and continuous is over 1000. Considering a 26 inch wheel will not go...