Recent content by northernmike

https://www.tindie.com/products/avandalen/yamaha-battery-dongle/

Hey all, I'm in need of a 4S13P 18650 pack built for my old Torqeedo T401 outboard. Please let me know what you can offer. Looking for quality cells and test data if cells are not new. Current will be moderate at max 50A across 13P. No packaging or BMS, just cells, nickel strips and hot...

Hi all, Does anyone know if Yamaha's current battery offerings are compatible - at a communications level - with older model PW series motors? I have a 2016 X0R40 PW and would like to buy a new spare battery dealer-direct for one of the Moro bikes (PW-X3). Here in Canada it isn't possible to...

A few notes from first days of operation. (with stock cells from 400wh 2016 pack, 1000kms use since new March 2023) - One-button menu system is easier to use than I expected. Intervals between changes are generous and the manual description is accurate and complete. (that being said, I would...

Thanks for your help, Yamaha PW X0R40 is back in action. Saved my build, I'm very grateful!

Date: Thu, 4 Aug 2011 14:26:07 -0500 From: thomas@castlecreations.com FYI - CC products are not waterproofed. See correspondence below: To: mike_alanko@hotmail.com Subject: Re: Thunderbird 54 for marine use Mike, It sounds like there is a software glitch in the ESC that is miscounting the...

Stamped lightning bolt in the floorpan adds 15hp... :wink:

Just being Socratic. :wink:

Go for it. :shock: How many AA cells are you considering??

Got some clear plastic pedals and also made a clear plastic backplate for the eTek brush holder (which I bought damaged). I changed the bolts that hold the brush holder to the body of the motor to 12-24 stainless because I needed the length and one of the finer-threaded stock studs was mangled...

Subject: Left Hand Threads From: Jobst Brandt Date: April 28, 2004 On bicycles, left hand threads are used mainly in three places, on left pedals, right bottom bracket (BB) bearing cups, and freewheel cones, to prevent unscrewing under operating loads. Unscrewing occurs from precession, in...

Hi Jeremy, Any news on the boat?

Hard to tune and eats power. Ask this guy: http://www.endless-sphere.com/forums/viewtopic.php?f=12&t=25841 He's losing power through his and only gaining a little top end. Currently he's experimenting with different springs to see if he can find a set that will hold up. They're just not...

+1