Recent content by Paintpennn

  1. Paintpennn

    Sw900 Error 10

    Recently changed the tire on my stealth bomber clone. It has a QS273 clone hub motor. It worked perfectly before I took the wheel off to change the tire. I reinstalled the wheel today and turned the ignition on and the display lights up but I twist the throttle and nothing happens. Like I said...
  2. Paintpennn

    Advice on recent purchase (Ali baba) (stealth bomber clone)

    I have a 21 inch wheel on front and back. The motor is a 2.5T which I haven't really seen that very often . I was trying to find some info about what that exactly means as far as performance. It seems to perform pretty well. Not a lot of tork. Not enough to wheelie for example. Has a top speed...
  3. Paintpennn

    Sabvoton 72150 is hot

    Now that the controller is exposed I can easily reach down and feel the temp of the controller. I do this often after pushing it hard and it's barely warm even on the hottest of days. Nothing even close to the first time I took that metal panel off after a short, albeit intense ride, and it was...
  4. Paintpennn

    Sabvoton 72150 is hot

    Sorry 1/8. Inch thick plexiglass panels
  5. Paintpennn

    Sabvoton 72150 is hot

    Moving the controller to outside of the frame seems like the best overall solution. Besides allowing for airflow it would make way for a bigger battery in the future. However not wanting to risk having my bike down for more than a day or two I came up with a temporary solution. I cut out some...
  6. Paintpennn

    General questions about chinese enduros

    I can't speak to the longevity of the stealth clones. I've had mine for a couple months and ive put over 2000 miles on it with no issues what so ever. What I did do was replace the side panels of the frame with plexiglass. I cut large channels in the plexiglass so the controller could get a good...
  7. Paintpennn

    Advice on recent purchase (Ali baba) (stealth bomber clone)

    I bought a stealth bomber clone through Ali Baba around May. Also One of my main motivations for getting the stealth clone was the nearly 4 hours a day I was spending on the bus to get to and from work. Our shop is 20 miles from my house. A 25 minute drive.. there's an interstate Freeway, a...
  8. Paintpennn

    Stealth Bomber clone Regenerative braking

    Are regenerative brakes possible on a stealth bomber clone with a "QS 273" motor and a sabvoton72150 controller ? Not sure what is needed or how to make that happen. Right now there is zero Regen braking.
  9. Paintpennn

    Sabvoton 72150 is hot

    Thank you amberwolf for your in depth response, I appreciate it. I'll move the controller to the down tube as it were. I'm finding I maybe should have done more (a lot more) research before buying this particular bike. In the three weeks I've had the bike I've already learned alot...
  10. Paintpennn

    Sabvoton 72150 is hot

    It's strapped to the top inside the metal frame of the bike above the battery. It's getting little to no air flow...
  11. Paintpennn

    Sabvoton 72150 is hot

    Hi, I'm new to ebikes. I recently bought a stealth bomber clone off alibaba. 12,000(allegedly) watt 2.5T motor with Sabvoton 150amp controller pretty standard fare . It has 72v 40 ah battery. Seems to run fine. Its a blast to ride. The other day after riding I took the battery cover off and the...
Back
Top