-
-
Sszkuba replied to the thread KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW).Personally i have not experienced. Van you post some pictures. Does it happen along with something not working properly?
-
Sszkuba replied to the thread KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW).You mean the mobile app "BluOsec" or something else?
-
Sszkuba replied to the thread KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW).Do we have somewhere in the code a protection from the motor stall/ blocked? like if the motor is blocked for >1sec it will set the...
-
Sszkuba replied to the thread new tsdz8 pswpower.Looking forward for some more info after couple of more rides. Like power delivery smoothness, overheating, bearing quality etc. - just...
-
SI'm one of the early adopters of this new Tongsheng motor. Fitted this motor just two days ago to my Cube Aim Allroad XXL. I have...
-
Sszkuba reacted to mbrusa's post in the thread TSDZ2 OSF for all displays, VLCD5-VLCD6-XH18, LCD3, 860C-850C-SW102. with
Like.
Thanks for the confirmation. I don't have all types of displays and therefore, to try, I need someone else's help. I would also like to... -
Sszkuba replied to the thread KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW).need to replace failed FETs on 12FET Kunteng: the original one is STP110N7F6: STMicroelectronics STP110N7F6 Which of the perimeters...
-
Sszkuba replied to the thread KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW).So the test were succesfull. I have fine tuned my invention wich is effort mode that actually is evolution of torque override/hibryd...
-
Sszkuba replied to the thread KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW).So i have increased phase current to the target values (2,5 x battery current), i have also changed SDCC from 4.0 to 4.1 version. Now it...
-
-
Sszkuba replied to the thread KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW).I am working on new conversion. The brake activation does not help or help on random basis. I have changed displayed perimeters to see...
-
-
Sszkuba reacted to Voron's post in the thread KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW) with Like.
I mean that according to my experience of flashing my own "replacement MCU" and the absence of posts about failed "replacement MCU"...
-
Sszkuba replied to the thread TSDZ2 OSF for all displays, VLCD5-VLCD6-XH18, LCD3, 860C-850C-SW102..Ok, thanks for confirming my understanding, can we say that eMTB mode somehow compensate that characteristics, ..i guess? :unsure:
-
Sszkuba reacted to mbrusa's post in the thread TSDZ2 OSF for all displays, VLCD5-VLCD6-XH18, LCD3, 860C-850C-SW102. with Like.
Exactly, the response curve remains that of the torque sensor, and may be different from that of the chart. I tried with perfectly...
-
Sszkuba replied to the thread TSDZ2 OSF for all displays, VLCD5-VLCD6-XH18, LCD3, 860C-850C-SW102..There was a procedure to get fully linear torques sensor response: How to calibrate the torque sensor however with the current...
-
-
Sszkuba replied to the thread KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW).So what you mean is that it is safe to flash this replacement MCU version?
-
-
Loading…
-
Loading…
