Recent content by zx6rj1

I live in Bonbeach. Maybe we should catch up at Carrum Beach :cool:

So it's been 12 years since I first purchased the kit! I haven't commute on the bike due to job change but I've kept the battery charged until about 2-3 years ago when my charger died without me knowing.Since then it wouldn't charge even with new charger. Not sure if it's the battery or BMS...

Battery update after 4 years. I've not used the bike for quite sometimes due to crankshaft issue which I fixed this week. I kept it charged using timer, but there was occassion where it went faulty and the battery got depleted. 5/12/2013 Full charge (immediately): 27.2 v Left overnight: 26.2v...

Are you referring to this freewheel? I had considered it but from the reading here they are a bit thicker? http://www.sickbikeparts.com/catalog/product_info.php?cPath=26&products_id=173&osCsid=ecm8oec2ttbsltrecd5cga4t96 I wasn't sure if it was a direct replacement. Did you simply replace the...

After a long time, I managed to fix my freewheel crank. It is the 'DICTA' version, not the CSK sprague version (thank god). So I changed the freewheel with ACS one. It fits perfectly, From eclipsebike.com in UK, 18GBP shipped to Australia! Great price and service...

I took the Elation, still in a state of broken sprag freewheel to its first SNOW excursion :D Very exciting. Riding in snow is very hard.

My V2 Freewheel Crankset had given up for a long time now. So I am researching how to get the Sprag clutch fixed. The Clutch seems to be CSK-PP34 (or CSK35PP) Previous communication with Allan from elsewhere: http://endless-sphere.com/forums/viewtopic.php?f=28&t=21248&start=15 Quotes from...

Well after 3+ years the first major malfunction :( On my way to work my crank freewheel finally failed. It now does freewheel BOTH ways. Lucky my battery was full and I simply throttle home :D Thanks for the tip re: pressed sprague clutch. I will try to dissasemble this tomorrow.

PROBLEM: Charging port intermittently disconnect After prolonged use, the connection is lose. Sometimes need to wiggle to get a charge. I had ignored this until last week when the battery died on the way to work. Replacement: Jaycar XLR port, Part #PS1018...

That's just crazy :D

Please expand in details ? What is this "shunt resistor" ??? :D What is a "standard throttle" Edit: Found it: http://endless-sphere.com/forums/viewtopic.php?f=28&t=14846&start=0 Is it really that easy ??

That's not good. My V2 crank developed intermittent "jam". If it's the same design as V3 then it may not be replaceable.

Problem: Intermittent connection after long use. In my case it started after >2 yrs, so I suppose this is normal wear/tear or dirt. Solution: Spray WD40 from the front of the switch. Avoid spraying the electronics. A more elegant solution would be to replace the switch, as it looks generic...

MOTOR Elation v2 uses Cyclone motor (170w version??) There are great dissassembly pictures here: http://mrbill.homeip.net/albums/cyclone_motor/index.html

Hey guys, seeing that Elation is no longer supporting the product due to going out of business, lets share information here ! I will copy critical information here, just in case things are missing in the future: http://polygon-quatro.blogspot.com/2011/10/elation-ebike-technical-support-v2.html...