Search results

Date Relevance Most replies

  1. H

    a2b scooters problem

    I have ordered a Lashout bike rack from a2b scooters http://store.a2bscooters.com/ ten days ago and after numeriouse attempts to call them (always goes streight to voice mail) and e-mail them. I have not heard anything and have been unable to get a hold of anybody. I am starting to get very...
  2. H

    Battery from battery which is also getting battery

    So I just got my hub motor set up to elivate all the problems I had with the old side mounted motor when something else came up. My bike rack has finely had it and the welds have failed in many places. Well my set up was this a marine battery case with bubble wrap, and other soft things to...
  3. H

    To much power draw?

    I upgraded my bike to a hub-motor and have noticed a sigfentely higher wattage draw than my old set up. This new set up I have seen draw up to 1,900 Watts and I am worried that might be to much for my battery. I have a Ping 48V 20AH V2.5 LiFePO4 Battery Pack and it says recommended for motors of...
  4. H

    Help with HS3540

    :?: I am upgrading to a HS3540 rear mounted hub-motor and would like to know what wiring work I need to do to the controller to make it all hook up right. These are the plugs that currently come from the controller a six pin female (for what I assume is the hall sensor) and three individual...
  5. H

    NO WASTE HEAT OR COOLING NEEDED...

    So I was at the detest and picked up Smithsonian magazine and found an article on electric trucks http://www.smithsonianmag.com/science-nature/Forget-the-Volt-Make-Way-for-Electric-Trucks-169807746.html what got me was this "Here is Hansel’s pitch, in a nutshell: Electric motors are powerful...
  6. H

    Need help picking a hub moter

    Sun gear broke on my Modified Lashout (1,000 watt motor/ 48v 20AH Ping/ 12 FET 4110 Mark II Extreme Modder LYEN Edition Controller) So I am going to get a hub motor because I am sick of always having problems with the current setup. I am wondering what recommendations there are for 1,000+ Motors...
  7. H

    HELP! I am sick of dealing with my Lashout

    Sun gear broke on my Modified Lashout (1,000 watt motor/ 48v 20AH Ping/ 12 FET 4110 Mark II Extreme Modder LYEN Edition Controller) I have been riding it like this for awhile so I thought it just wore out so I put in another planetary gearing assembly that I had laying around and took off. No...
  8. H

    NEED REPAIRS DONE.

    I Have this system here http://www.thesuperkids.com/10wabmc36vor.html when I turn on the power the power LED goes on but nothing happens when I apply the throttle. Is there anyone out there who can trouble shoot and fix this kind of setup?
  9. H

    Bike won't go

    Here is my electrical system http://www.thesuperkids.com/10wabmc36vor.html I hook everything up I turn on the power the LED lights up and then when I initiate the throttle.... nothing. Now the problem could be several places but I don't know where to poke around with my multimeter and I don't...
  10. H

    DC/DC converter hook up help.

    I want to put a DC/DC 48v-12v converter on my e-bike. To do this I would wire it in parallel with my controller. However I don't want to have any power go through the DC/DC converter without my controller being on (therefore no accidental leaving the lights on when I park). To do this I was...
  11. H

    HELP I AM AT MY WITS END!

    I have a former Lashout bike. I say former because it has been heavily upgraded with a 1,000 watt motor and a 48v system. Now the Lashouts motor mounting plate is designed to be adjustable so you can adjust the tension on the chain that goes from the motor to the rear wheel. This is done by...
  12. H

    How to monitor a ping battery

    Since I have upgraded my old lashout to a 1,000 watt motor working off a 48v 20ah ping I haven't had any way to monitor the battery condition. Would something like this work? http://www.ebay.com/itm/GOLF-CART-LED-BATTERY-INDICATOR-METER-48-VOLT-48V-NEW-/120860758095?hash=item1c23dcd04f ?
  13. H

    48 going on 12... VDC that is

    Well for various reasons I need to get a 12VDC supply for various parts on my 48VDC (More like 50 since it is a ping but that shouldn't matter). I thought voltage regulators were the answer but the 12 volt regulator (7812) but the max input voltage is 35V (could I use this on a 36 volt scooter...
  14. H

    disassemble a crystalyte controller

    I am trying to disassemble a crystalyte controller but it is proving imposable. Any one have any idea how to cut through the metal without destroying the controller? The back and front come off fine the bottom contains rows of screws (one of witch won't come out and is stripped to hell). Even...
  15. H

    How to discharge batterys

    I have A ping 48v 20ah battery and it is sujusted that I fully discharge it and cycle it for maximum power. Since I don't have a battery meter and don't want to ride my bike until I get stranded I was thinking of hooking the battery up to a 40 watt incandescent light bulb. Would this work?
  16. H

    Need a bag for Ping

    I have a lash out that I am running off a ping, I was using a bag kind of like this that mounted on top of the rack. Well a few days ago I hit a bump and turned my head only to see my battery bag rolling on the ground. The straps had riped right out of the bag leaving four holes on the corners...
  17. H

    Need help with problem.

    I have semi-completed a upgrade to my Lashout bike, with a 1,000 watt motor. On my first test drive I noticed a problem arise. The bike makes a racket when I turn on the motor instead of trying to describe the sound and the problem I made a video to show what is happening...
  18. H

    Need a Pannier for Batterys

    I have a Lashout bike that I recently got some ping 48v 20Ah Dimension: 195x210x150 mm / 7.7x8.3x5.9 inches 21.90 lbs I need a solid pannier that can hold these battery and could protect them in a crash. Any suggestions. I was looking at something like this City Box Pannier...
  19. H

    Battery case help.

    Does anyone have any idea how one would go about mounting a Ping LiFePO4 48v 20Ah battery to a lashout bike? I want to be able to easily remove the battery. I know there are a lot of rack mounting options but I don't want to mount it on my rack since that makes the bike top heavy and awkward. I...
  20. H

    Crystalyte Controller need help!

    I have a Crystalyte 72 Volt 35 Amp Controller I got from http://www.thesuperkids.com/cr72vo35ampc.html every time I hook it up to my 24v SLA battery pack it blows the 40Amp fuse. Why is a 35 Amp controller blowing out a 40 Amp fuse? My best guess so far is that the capacitor inside the...
  21. H

    Need Help choosing battery

    I want to get some LiFePO battery to run a 1,000 watt motor at 48volts I keep hereing terms like 1C, 4C, ex ex, and don't understand the terms all I understand is Voltage Amprage and Wattage. I also know just because the motor is rated at 1,000 watts that the controller draws more power because...
  22. H

    Need batterys for bike Upgrade

    I am upgrading my Lashout bike to 1000 Watts at 48v I am wondering the beast battery to use for this, Also how would I go about mounting said battery?
  23. H

    Unidentified controller wires.

    On my controller I have two Unidentified wires, I have hooked everything up throttle, break switches for boat front and rear breaks motor, power but these two wires are left unused, does anyone have any idea what these could be for? They seemed to be taped over I can't figure this out. Also how...
  24. H

    Electric car FAIL

    Forever Electric car, what a dumb assess. :lol: :roll: http://www.youtube.com/watch?v=bkcn8ZkvKKc&playnext=1&list=PLCF717ED079751041
  25. H

    Lashout battery box 48v?

    Well I jury rigged 4 SLA battery to my Lashout (upgraded 1000W motor and controller) to see what would happen and damn that thing really took off. Since my SLA arrangement wasn't ideal (I used twist ties to hold them on to the rear rack) I was wondering if a 48v Lithium Ion battery pack could be...
Back
Top