Search results

Date Relevance Most replies

  1. gogreenpower

    How to open Rear hub motor without screws?

    Thanks, working on a tool now
  2. gogreenpower

    How to open Rear hub motor without screws?

    Hi Guys, Any ideas on how to open up this motor? I don't have anything that fits those 4 cut outs around the freewheel threads, if that's it, then hammer and punch is my only option.
  3. gogreenpower

    Display speed cycling from 0 to 70kph

    I can open the motor but I'll try the controller first, it's not my bike. It has a new type of Julet connector that I'm struggling to find, ever seen these?
  4. gogreenpower

    Display speed cycling from 0 to 70kph

    The system was working one day and stopped the next. Just noticed the throttle doesn't work as expected. It used to push the bike to 6km/h without pedaling, now it's barely noticeable, does seem to work in combination with the pedal assist by providing a little boost. Controller is a KT36SVP...
  5. gogreenpower

    Connector identification

    Hi Guys, Anyone know what these are called?
  6. gogreenpower

    Display speed cycling from 0 to 70kph

    It's a hub motor, Smartmotion is the brand. Brushless I assume. The speed displays when pushing the bike, as well as the throttle and pedal assist. The fault is common to all 3. Either the white wire from the hub or something in the controller?
  7. gogreenpower

    Display speed cycling from 0 to 70kph

    Hi Guys, I have a problem with my display, whenever I use the throttle or pedal assist the speed displayed ranges from 0 to 70km/h, it goes up and down every few seconds. It's a generic controller/display combo. I believe the speed is being sensed through the motor as there is no external...
  8. gogreenpower

    What type of hub is this?

    Everything I find doesn't have the recessed bearing
  9. gogreenpower

    What type of hub is this?

    Hi guys, I know it's not specifically related to ebike's but it's for a trailer that will be pulled by my ebike. Anyway, I can't for the life of me find this type of hub online, does anyone know what type it is and if possible where can I get some. Thanks, Green
  10. gogreenpower

    Building a full Suspension, BBSHD fat bike

    Why do some pictures post and others need to be downloaded?
  11. gogreenpower

    Building a full Suspension, BBSHD fat bike

    So I have it all up and running, just tidying up a few little things before i call it complete. Here is a little mod I added yesterday in my minimalism quest. I still need to add an on/off switch, wired to one of the ebrakes or the LCD plug and get rid of the LCD. Green
  12. gogreenpower

    Building a full Suspension, BBSHD fat bike

    After I had the battery sorted I fitted the BBSHD, I needed to file about 1mm off the BB outside where the rear suspension pivot point is welded on. Other than that installation was relatively straight forward.
  13. gogreenpower

    Building a full Suspension, BBSHD fat bike

    Finally have it up and running. For stage one which I done second.. I built a 14S 5P battery from NCR18650GA'S and a bestech power H167 BMS. I did have a bit of difficulty with the BMS's, I brought 3 for the 3 batteries I have planned but 2 out of the 3 didn't work. Took...
  14. gogreenpower

    Programming the Bafang Middrive BBS01+BBS02

    Have a read of this https://www.google.com.au/amp/s/electricbike-blog.com/2015/06/26/a-hackers-guide-to-programming-the-bbs02/amp/?client=ms-android-telstra-au It explains things pretty well
  15. gogreenpower

    Programming the Bafang Middrive BBS01+BBS02

    I don't think there is a one click solution to disable it, but if you set all the PAS levels to 0, that should do the trick
  16. gogreenpower

    Building a full Suspension, BBSHD fat bike

    Deleted
  17. gogreenpower

    BBSHD unused cable removal

    It is an Alibaba special, not to bad for the money and for what I was planning on doing to it. 26 Inch Mountain Fat Bike Soft-tail Frame 4.0 Width Tire 24 Speed Aluminum Alloy Frame http://s.aliexpress.com/VVFVbU7Z (from AliExpress Android)
  18. gogreenpower

    BBSHD unused cable removal

    That is exactly what I had in mind, minimalistic as possible
  19. gogreenpower

    BBSHD unused cable removal

    That's ok, I'm not planning on using the LCD, I have it on at the moment until my programming cable turns up
  20. gogreenpower

    BBSHD unused cable removal

    Well if that what the other one is than I guess so, I was under the assumption it was for a headlight controllable through the LCD. You mention reprogramming, it doesn't turn off currently with it not connected, I couldn't see that cutting it would make a difference?
  21. gogreenpower

    BBSHD unused cable removal

    Hi guys, Is it possible to remove the headlight and the speed sensor cables coming out of the BBSHD controller? I don't want to just cut them, I'd prefer a cleaner solution like removing them from the inside of the controller. Thoughts? Green
  22. gogreenpower

    14S 5P Battery build - Unexpected BMS voltage output

    Yeah 2 out of 3, the second one to be fair I didn't solder, just alligator clips and fancy wire knots.... I just wanted to check output voltage and it was 4v less than the battery. I don't like my chances of this third one lasting so I'm on the hunt for something else, I just can't wait any...
  23. gogreenpower

    14S 5P Battery build - Unexpected BMS voltage output

    It was with FedEx, took maybe one week to get to Perth. About 60 euros shipping.
  24. gogreenpower

    14S 5P Battery build - Unexpected BMS voltage output

    Hi muzza, Nice pickup on the wire but its just that i didnt have enough black left, so red it was, it goes to the right spot. I figured it out, the problem was the first 2 BMS's i tried were not working properly. I've asked for the schematics from bestech, will see if they come through and see...
  25. gogreenpower

    14S 5P Battery build - Unexpected BMS voltage output

    Ok so during charging, currently up to 3.65v per group I've found one parallel group that reads 3.55v, I know it's just dumb/bulk charging at the moment but interesting none the less. All brand new cells, all started the same voltage, maybe some type of short when I soldered on the sense...
Back
Top