Search results

Date Relevance Most replies

  1. N

    Arduino: Cycle Analyst / Phaserunner data logging

    There is a project mentioned in this topic for reading the CA / PR data logs from a PC. Is there also a project for Arduino mc or has someone ever successfully read the data logs with an Arduino mc? Probably something like this would work. But before I start investing more time in it I want...
  2. N

    MAC speed sensor adding

    For whatever reason, MAC motors don't seem to have a built-in speed sensor which can provide a speed signal also while coasting. Has anyone ever added a speed sensor to a freewheel MAC motor? Would this be feasible with a reasonable amount of effort?
  3. N

    Cycle Analyst speed display

    Can the Cycle Analyst V3.1 DP display the speed from a freewheel MAC with a hall sensor? I will run it with a Phaserunner. The MAC has a 5 pin hall connector: PIN1: Hall sensor Green PIN2: Hall sensor Blue PIN3: Hall sensor Yellow PIN4: Black, Gnd PIN5: Red, +5V Or do I need a Cycle Analyst...
  4. N

    Phaserunner acceleration

    I've read some posts where users complain about slow acceleration with the Phaserunner. I want to use the Phaserunner with a MAC 10T and 48V / 52V batteries. Would the Phaserunner also be a good decision in terms of acceleration? I've also read that the following settings could improve the...
  5. N

    Connecting a MAC with a Baserunner Z9

    Are there any ready-made cable adapters for this type of application? The MAC has this 3 cables / connectors: Cable 1: Motor phase, Anderson 30A connector: PIN 1: Yellow PIN 2: Blue PIN 3: Green Cable 2: Hall sensors, Julet Z509 connector: PIN 1: Green PIN 2: Blue PIN 3: Yellow PIN 4: Black...
  6. N

    Reention 505 batteries with higher volts

    Does anyone know if there is a manufacturer who build Reention 505 compatible (case, connectors) batteries with high capacities (21Ah) and higher volts (60V, 72V)? Would the case even be suitable for this?
  7. N

    Battery suitable for a GMAC 10T?

    I plan a conversion of a NCM Moscow. Motor, controller and display should be replaced with this parts: GMAC 10T, Baserunner, Cycle Analyst Specifications of the battery: Dehawk i5 Voltage: 48V Capacity: 16Ah Watt-hours: 768 Cells: NCR18650GA Panasonic Internal resistance: =220mO Overvoltage...
  8. N

    Power a microcontroller from a Cycle Analyst?

    I need 3,3V for a ESP8266. I would prefer it, if I could get the power directly from the Cycle Analyst. Does somebody know whether the CA can provide this and on which line this voltage is applied?
  9. N

    ERT displays

    I em interested in the ERT displays and have some questions about the displays, does someone know how to contact them? I sent an email to their support address a few weeks ago but have not yet received an answer.
  10. N

    Arduino between a Cycle Analyst and a controller?

    Is there any project or documentation about how to interpose an Arduino between a controller and the Cycle Analyst? Question would be: Are there any ready to use scripts for listening and sending to the communication between the Cycle Analyst and a controller (Baserunner, ASI BAC 800)?
  11. N

    How to key protect settings and presets with Cycle Analyst?

    Is it possible to protect all presets with a key except for the default preset which should be loaded when the CA starts? Also all setting menus should be key protected. Therefore, there should be only the default preset available all other actions should require entering a key. Reason: In...
  12. N

    PAS Sensor compatible with Cycle Analyst

    Does anyone know how to make this PAS Sensor readable for the Cycle Analyst V3.1?
  13. N

    MAC torque plate for a NCM Moscow / Magnum Peak frame

    The NCM Moscow / Magnum Peak has a already a well integrated torque plate, unfortunately on the wrong side. What I need is a torque plate with an opening in the middle that fits with the MAC axis for this side of the frame. As far as I have been able to find out, there is only the possibility...
Back
Top