Search results

Date Relevance Most replies

  1. woojak

    KT controller 2x Light output

    Hello. I encountered the exact same problem as you gentlemen and I think I have a simple solution to it which is housed in the controller housing. So far I'm after testing and everything seems to work great, as long as we have this little working PCB. :wink: The solution is based on the use...
  2. woojak

    TSDZ2 EBike wireless standard (like Specialized Turbo Levo) - OpenSource

    On the front there is a power status LED (green is proposed) Resistor R3 is 330 ohm, you can use another one to brighten or dim the power status LED on the front. (You may also choose not to install these 2 things :) ) Sent from my MAX1 using Tapatalka
  3. woojak

    TSDZ2 EBike wireless standard (like Specialized Turbo Levo) - OpenSource

    I can see the project going forward. nice job, it looks clean and nice! :) Sent from my MAX1 using Tapatalka
  4. woojak

    TSDZ2 EBike wireless standard (like Specialized Turbo Levo) - OpenSource

    unfortunately I wasn't looking for a solution to my problem. it is very possible that it is my computer's fault or a fake from aliexpress: / Sent from my MAX1 using Tapatalka
  5. woojak

    TSDZ2 EBike wireless standard (like Specialized Turbo Levo) - OpenSource

    I am a Windows 10 user: D Sent from my MAX1 using Tapatalka
  6. woojak

    TSDZ2 EBike wireless standard (like Specialized Turbo Levo) - OpenSource

    I have a similar problem [emoji3] 2 devices do not respond completely (after many attempts to upload the software) 3rd device can be seen in dfu but the software does not run on it. Unfortunately, I gave up, I had a lot of potential in this project, but unfortunately I still have to wait. so...
  7. woojak

    TSDZ2 OSF for all displays, VLCD5-VLCD6-XH18, LCD3, 860C-850C-SW102.

    I think that programming is done with the same Hex file :) the difference is only in the number of cables so it should not make any difference [emoji3] Sent from my MAX1 using Tapatalka
  8. woojak

    TSDZ2 EBike wireless standard (like Specialized Turbo Levo) - OpenSource

    ok checked. re-uploaded bootloader each time. (** Verified OK ** not every time I see it) follows this sequence: 1.Boot loader (TSDZ2_wireless-bootloader_with_sd-v0.9.0.hex). 2. The TSDZ2_wireless_ota_update-vX.X.X.zip file via nRF Connect. 3. Checking in devices whether tsdz2 is available...
  9. woojak

    TSDZ2 EBike wireless standard (like Specialized Turbo Levo) - OpenSource

    ok I will check older versions. "Maybe even build the firmware by yourself from the repository and test." - I'll have to read how to do it. I ordered nRF from Aliexpress, maybe this is the reason?
  10. woojak

    TSDZ2 EBike wireless standard (like Specialized Turbo Levo) - OpenSource

    Wysłane z mojego MAX1 przy użyciu Tapatalka
  11. woojak

    TSDZ2 EBike wireless standard (like Specialized Turbo Levo) - OpenSource

    GPS and Bluetooth enabled, still nothing. (when I flash the firmware by wireless I turn on the GPS ;])
  12. woojak

    TSDZ2 EBike wireless standard (like Specialized Turbo Levo) - OpenSource

    Hello. Yesterday I received 2 new nRFs, I put the bootloader and flash the firmware by wireless. I still can't find the device in the Bluetooth list. screenshots below. I have no idea what I am doing wrong ;/
  13. woojak

    TSDZ2 EBike wireless standard (like Specialized Turbo Levo) - OpenSource

    Hello. In my spare time I made a few corrections in mine board (v2.1) and a new "adaptive" PCB for nRF. maybe someone will come in handy. :] More on wiki: https://github.com/woojak/TSDZ2-Internal-Wireles-Board/wiki I still have a question about nRF programming. is the given programming...
  14. woojak

    TSDZ2 EBike wireless standard (like Specialized Turbo Levo) - OpenSource

    Sorry for off topic Casainho, could I ask for the dimensions of the controller PCB? I saw that in the topic "TSDZ2 48v 2020 new firmware" you had to do with a removed PCB from a metal housing :) I would be grateful for the information. Greetings! Edit Thxx
  15. woojak

    TSDZ2 EBike wireless standard (like Specialized Turbo Levo) - OpenSource

    I also always solder to the pads when I connect STlink. Unfortunately, I put the whole board together in the first place and only then I figured out that it would have to be programmed. It programs the same way "I program the bootloader and then flash the firmware by wireless." The whole...
  16. woojak

    TSDZ2 EBike wireless standard (like Specialized Turbo Levo) - OpenSource

    I perfectly understand that you want to stay with the current idea. Simplicity is beautiful! Following your advice, I'm starting to create a repository on the git hub:] I added the jumpers option because I was not sure if it would be added to the nRF software (I can't program :( ), so it is...
  17. woojak

    TSDZ2 EBike wireless standard (like Specialized Turbo Levo) - OpenSource

    Hello. In my spare time, I finally managed to design an internal PCB based on the TSDZ2 EBike Wireless Controller with some small additions :) I added Relay for lights with a voltage higher than 5V (you can choose whether it should be controlled from nRF or from the motor controller), solder...
  18. woojak

    TSDZ2 EBike wireless standard (like Specialized Turbo Levo) - OpenSource

    @casainho I know that these are not priorities but it would be nice if you had them in mind :) @beemac. I can see that we think alike! :D @Frzoen thank you for the response. I can see that I have to get down to making some sensible plate that fits my requirements [emoji6]
  19. woojak

    TSDZ2 EBike wireless standard (like Specialized Turbo Levo) - OpenSource

    Hello gentlemen! Finally, I read the whole topic, it was much more than on TSDZ-ESP32:] @casainho / rananna / beemac / Headless / all others. I am impressed with your work as well as the idea put into the project! Thanks for all your time! Thank you also @bikelpl without his videos I would not...
Back
Top