Search results

Date Relevance Most replies

  1. N

    Safe to do?

    I need one more battery to make sure, that I'll have enough power for the pending TPT ride, with the new Jugg 4 - 52v -17.5a bike . I have 4 - 48v -17.5v battery's, that fit the Wart Hog bike. Will it be safe or OK to use a 48v - 17.5 battery on a bike that uses a 52v - 17.5a system, and NOT...
  2. N

    Dual Derailleur Hangers?

    Chalo, Thank you. I have been attempting to to get a Sram 9 sp med cage derailleur to work on this Juggs bike, shifts and works OK. ( the Sram is a back up, for when I damage the OEM one). Both the Alivio and Sram have the same cassette sizes, same spacing between the gears, same 34 tooth...
  3. N

    Dual Derailleur Hangers?

    Please help me understand Why? I am attempting to find out why the Shimano Alivio long cage derailleur - 9 spd, would have a second hanger (1" long c/c between holes) permanently attached to it and then be attached to a standard 386 hanger, that is attached to the bike, for use with a 34T...
  4. N

    Longest Bike Trail In The USA

    Here is a ride I am preparing for with my Wart Hog MD 750, just waiting for the rain and thunder showers to clear up, and trails repairs after a long deep snow winter. I just found out about it a couple months ago. https://tahoepyramidtrail.org/
  5. N

    Loose chain.....

    Here is an UPDATE for the single gear emergency use solution, Remember there is NO DERAILLIER, it has been destroyed and can't be used, this is single gear EMERGENCY fix/use to get home. When using the 15T rear cassette gear to the 44T main drive gear, I need 116 links of chain, Going up to the...
  6. N

    Loose chain.....

    I spend 95% of my riding time Off Road = on Cow/Wild horse/game trails, up & down dry sandy/rocky creek beds and any other trails I can find. I carry all the tools/extra equipment to do repairs, I hope, and have tire liners, Flat out installed, extra tube/tire, and the required tire repair...
  7. N

    Having a new battery built.....

    I am looking for the required or mandatory spec's to have a battery built, from these 2 battery builders, UPP and EM3 EV. Some of the questions I have are this: Which of the below spec's are REQUIRED for a good battery build. (I know nothing about building a battery, or what is required.) 80...
  8. N

    EV charging stations = certain ebikes also can charge?

    Per the information/photo's provided, (you don't have to buy/make any adaptors), this adapter J1772 socket has 1-3 standard 120 plugs that fit any standard ebike, charger, and allows you charge your bike with it's standard charger etc. I checked my OEM charger and it's a 220-240v model charger...
  9. N

    EV charging stations = certain ebikes also can charge?

    It appears that some Ebikes can now be able to use the EV charging stations, with the use of adaptor, see info below, https://bikeportland.org/2022/03/16/a-local-e-bike-rider-has-found-a-way-to-charge-at-ev-charging-stations-built-for-cars-350386/amp A local e-bike rider has found a way to...
  10. N

    Sticky thread index for "Bicycle Mechanical & Structural"

    Here is some useful information for rims/tires dimensions/spec's etc. I don't know if this has been posted here, and I don't know where it is should be posted, so I'll let a Mod move it to the proper place. HTH's. https://www.bikecalc.com/wheel_size_math# Thanks, Don
  11. N

    21700 Cells. Is anyone making hidden tube batteries with them yet?

    Yes, Bikonit uses 21700 batteries in their Wart Hog series of Ebikes, OEM battery's is 48v, 21700 battery's, has 39 cells/13 in series 3 in parallel, 15ah/720wh. HTH's
  12. N

    Bafang motor replacement

    Mitch When I was in ADC (80's) I spent 7+ yrs in Gerlach, I travel over most all the area up to the Oregon border, and West to the Cal border, I love the High Rock/Grassey areas, Little high rock canyon is a very special place to me, took a Sage grouse thru the windscreen on the Super Cub...
  13. N

    Transporting heavy ebikes - show me your solution

    Gobi I plan on using a couple of 6' long ratchet straps, one on each side with soft wrap straps (motor cycles types) one off each side of the seat post stem, that will keep the bike straight up/down and pulling down into the wheel well dropin's spots etc, with the bolt thru over the rims, I...
  14. N

    Bafang motor replacement

    Hi Simonov I also can't figure out the lack of replies, I guess nobody has any interest in this type of stuff....... I am hoping I can get this new Uart motor programmed to do what I want to use it for, here is the program I am going to use, Jon does the same type of riding I do, so this...
  15. N

    Transporting heavy ebikes - show me your solution

    Guys Here is the one I got coming, all steel, can be easley be adapted if needed, also the spacing of the wheel wells allows for each wheel to sit in a recessed pocket and a bolt is inserted over the rim and thru the side carriers supports, locking the bike in and to the carrier rack, I'll also...
  16. N

    Bafang motor replacement

    Hi Simonov The reason I am changing this motor out to a Uart motor is because I am using the bike to explore off road (cow/wild horse) trails into some hunting areas that cannot be reached via roads etc. Most of these cow/wild horse trails require riding on 12" wide single tracks, and when you...
  17. N

    Bafang motor replacement

    Ok Guys I am nervous as a Long Tailed cat in a room full of rocking chairs, first time doing anything like this, I have all the parts (I hope) except 1 part, which is in route to here some time this coming week, for changing out the 1000W Bafang Cbus motor over to 1000W Uart, on my MD 750 Wart...
  18. N

    Serial number Questions

    E-HP The reason for my questions is so "I CAN KNOW" the difference between the UART and Canbus motors, so the answer is neither, the goal, it is to get RID of this motor and obtain a UART motor, so I can program it to what I want and need to use in my riding style, which can't be done at this...
  19. N

    Serial number Questions

    Thanks Amber From what I understand and learned from several e bike forums, so far, you can't just change the controller, talking (Bafang) here, and have everything work correctly, you can't mix Uart and Canbus programing protocols together etc. I have a couple of photo's showing the Bafang's...
  20. N

    Serial number Questions

    Guys & Gals I have a question for all of you, Can a Bafang 620/510 motor be identified as to it is a Uart or Canbus protocol, by using the serial number and the other information that is stamped on the bottom of the motor. I bought a Bafang bike G510 motor in the last days of Dec 2021, it...
  21. N

    Bafang M620/G510 (and all other Bafang motors) now on CAN-BUS (2021+) rather than UART (2018-2020)?

    Al Thank you. I realize that a brand new bike (+100 miles) may have some minor quirks/problems until everything settles in etc, I just hope that this is not a continues trail of problems, if you know what I mean. :roll: I love this bike, it just what I wanted to go into the places that I...
  22. N

    Bafang M620/G510 (and all other Bafang motors) now on CAN-BUS (2021+) rather than UART (2018-2020)?

    I also bought a Dec 2021 Wart Hog MD750 from Bolton, the bike had a bad battery (Won't hold a charge), this problem has been taken care of (I hope) by Bikonit. The battery has been sent to a Calif battery repair place on the 28 of Feb, it was supposed to take a couple of weeks to repair and...
Back
Top