Bikebrap said:Mine works in sensorless mode when halls get disconected
Which one did you get? Let's talk about the most powerful ones... who is pushing really big power through these things?
Bikebrap said:Mine works in sensorless mode when halls get disconected
EHCanadian said:I'm pushing 108v though a 96v 1500w controller.
Had to have a 108v charger created to charge these (acid) 130v charge 124v float
jase1979 said:What I'm trying to understand is what the use of a 3 speed switch when you can control the speed with a throttle?
Bikebrap said:sunwin 72W 1500W
I tried contacting hksunwin from ebay once and they were so bad at english i gave up after few replays, it was leading to nowhere.
I red a few times there are folks that have no delay on this controllers.
So I contacted hksunwin again to see what cotrollers have no delay and if it can be removed from mine. This time they were a bit better at english.
Basicaly they say "explosive power" (that is how they say for no delay) is not safe and there is no way to remove 0.5 seconds delay
I'll see where this leads to, and will post here if I get any usefull info.
P.S. delay is greater with speed, when you let off and twist the throttle again it can be like 1-2 seconds of delay once you achieve full speed
markz said:Well I guess I should actually use one of my 2 sunwin controllers for my MXUS 3000W.
Ianhill said:EHCanadian said:I'm pushing 108v though a 96v 1500w controller.
Had to have a 108v charger created to charge these (acid) 130v charge 124v float
What's the output amps on max setting is it 56amp sensorless ? So its around 5.4kw on boost.
My 48-72v 1500w is 56amp on high setting so I get about 3.7kw I'm tempted to get the 96v as its cheap enough I'll run it 24s lipo or 100.8v of the charger the lvc is set for 83v or 3.45v per cell with my set up which is on the low side but within tolerance it seems 108v is a bit too heavy on the board hopefully she will hold the 100.8v in the stable and not let the smoke out.
markz said:There was another Sunwin auction was thinking about buying a 48V since I have a 60V and 84V.