MRC Motorsports
1 mW
- Joined
- Jun 21, 2017
- Messages
- 15
I started a project and got to 90% and lost interest.
The frame, forks etc. are 2007 Husqvarna TE450 rolling chassis
I purchased a QS 273v4 with 17" alum wheel and had stainless torque arms machined
I added new shinko dual sport tires font and rear
I purchased the Nucular 24F 500 amp controller with computer and potting
I made a battery box that fits in the frame, the lid needs to be completed.
I installed (48) 25AH LiFePO4 in 24s2p with copper bus bars. Some may have self discharged by now
Installed a 300Amp BMS, circuit breaker etc.
Domino twist throttle
thumb throttle for rear regen braking
stock brembo front brake
shocks and forks could use new seals
the computer is not wired up, just short of being able to test drive it.
Make offers for whole or parts. Whole bike local pick up or you arrange shipping.
The frame, forks etc. are 2007 Husqvarna TE450 rolling chassis
I purchased a QS 273v4 with 17" alum wheel and had stainless torque arms machined
I added new shinko dual sport tires font and rear
I purchased the Nucular 24F 500 amp controller with computer and potting
I made a battery box that fits in the frame, the lid needs to be completed.
I installed (48) 25AH LiFePO4 in 24s2p with copper bus bars. Some may have self discharged by now
Installed a 300Amp BMS, circuit breaker etc.
Domino twist throttle
thumb throttle for rear regen braking
stock brembo front brake
shocks and forks could use new seals
the computer is not wired up, just short of being able to test drive it.
Make offers for whole or parts. Whole bike local pick up or you arrange shipping.
