beto_pty
1 kW
Favorite 6s ESC+Wiimote Cover
Model is made in solidworks and the file is available in Thingyverse.
http://www.thingiverse.com/thing:658229
![ScreenHunter_64 Jan. 29 14.38.jpg ScreenHunter_64 Jan. 29 14.38.jpg](https://endless-sphere.com/sphere/data/attachments/85/85551-0272b5275cdf0eb0fc278ac3d99c3435.jpg)
As is usual in my covers the Esc must be dissasembeled and the fan disconnected.
![ScreenHunter_66 Jan. 29 14.41.jpg ScreenHunter_66 Jan. 29 14.41.jpg](https://endless-sphere.com/sphere/data/attachments/85/85552-ff769b1186abcdc3c70d601be3aa21bf.jpg)
The final Esc is screwed onto the board with standard gypsum screws.. probably a better way but these work fine
![ScreenHunter_68 Jan. 29 14.41.jpg ScreenHunter_68 Jan. 29 14.41.jpg](https://endless-sphere.com/sphere/data/attachments/85/85553-f708b69f81be91cdef31567008b12a15.jpg)
Prints out adequately rafted without supports, but you get a much more solid part using supports..
Will mount mine tomorrow. and post a pic
Model is made in solidworks and the file is available in Thingyverse.
http://www.thingiverse.com/thing:658229
![ScreenHunter_64 Jan. 29 14.38.jpg ScreenHunter_64 Jan. 29 14.38.jpg](https://endless-sphere.com/sphere/data/attachments/85/85551-0272b5275cdf0eb0fc278ac3d99c3435.jpg)
As is usual in my covers the Esc must be dissasembeled and the fan disconnected.
![ScreenHunter_66 Jan. 29 14.41.jpg ScreenHunter_66 Jan. 29 14.41.jpg](https://endless-sphere.com/sphere/data/attachments/85/85552-ff769b1186abcdc3c70d601be3aa21bf.jpg)
The final Esc is screwed onto the board with standard gypsum screws.. probably a better way but these work fine
![ScreenHunter_68 Jan. 29 14.41.jpg ScreenHunter_68 Jan. 29 14.41.jpg](https://endless-sphere.com/sphere/data/attachments/85/85553-f708b69f81be91cdef31567008b12a15.jpg)
Prints out adequately rafted without supports, but you get a much more solid part using supports..
Will mount mine tomorrow. and post a pic