Seya
10 W
- Joined
- Feb 27, 2012
- Messages
- 81
I wanted to hear from those who have Bafang BBS kit.
Could i install a typical cadence pas sensor. Like this http://m.ec21.com/mobile/sDetails.jsp?offerId=10169165
Obviously it must go on the left side of the crank.
It just looks a little cramped with the spacers and mounting bracket.
The reason im doing this is to use a rear hub motor with the bafang kit
Thanks!
Could i install a typical cadence pas sensor. Like this http://m.ec21.com/mobile/sDetails.jsp?offerId=10169165
Obviously it must go on the left side of the crank.
It just looks a little cramped with the spacers and mounting bracket.
The reason im doing this is to use a rear hub motor with the bafang kit
Thanks!
