galp
100 W
The new BESC format is here. I started designing G3 but later scrapped it and went straight to G4. This version will be capable of even more serious current and higher voltage.
At first glance:
Take a look at the PDF files for more details and also mechanical dimensions. On a side note, this motor controller will probably be my master thesis next year.
I've recently acquired Yamaha quad bike that I'd like to convert to electric. This controller should pair well with ME1616 or with EMRAX208 LV. We are also developing scalable BMS solution for this quad bike project. We are planning to build 30S36P pack with Samsung INR21700-30T cells.
At first glance:
- 12x IXTN400N15X4 in SOT-227 housing
- 700A phase current
- 30S capable
- 90 mm^2 phase busbars, 60 mm^2 battery busbars, aluminum or copper
- Hall phase shunts
- Integrated capacitor bank
- Advanced signal conditioning for voltage and current sense
- Hardware protection against:
- Short circuit (desat)
- Overcurrent
- Overvoltage
- Overtemperature
- Easy thermal management
- Self powered with shutdown mode
- Automotive sealable header for IO connection
- BOM ~500€
- Fairly easy to assemble
Take a look at the PDF files for more details and also mechanical dimensions. On a side note, this motor controller will probably be my master thesis next year.
I've recently acquired Yamaha quad bike that I'd like to convert to electric. This controller should pair well with ME1616 or with EMRAX208 LV. We are also developing scalable BMS solution for this quad bike project. We are planning to build 30S36P pack with Samsung INR21700-30T cells.