I'm starting to use this awesome ANT BMS with the bluetooth app and so far so good, but since it's my first time programming a BMS, I have a few questions:
- It's default high cell protect is 4.19V while the high cell protect release voltage is 4.1V, is that common to set it to 4.19V? usually it's 4.25V but I don't wanna ever go that high.
- Balance difference to start balancing is set to 0.01V, isn't that too tight? wouldn't it risk the scenario of going into "race" where it balances down non stop and depletes the whole pack?
- There is a setting called Precharge Current and it's set to 20A, any idea what is it?
- There is a setting for short circuit current, any idea what to type there? why would I allow any amount of current in a short circuit? it also has another setting called short circuit delay set to 600ms.
- In addition to the total pack capacity setting it has a setting called total cycle capacity, any idea what they mean by that?
- It's default high cell protect is 4.19V while the high cell protect release voltage is 4.1V, is that common to set it to 4.19V? usually it's 4.25V but I don't wanna ever go that high.
- Balance difference to start balancing is set to 0.01V, isn't that too tight? wouldn't it risk the scenario of going into "race" where it balances down non stop and depletes the whole pack?
- There is a setting called Precharge Current and it's set to 20A, any idea what is it?
- There is a setting for short circuit current, any idea what to type there? why would I allow any amount of current in a short circuit? it also has another setting called short circuit delay set to 600ms.
- In addition to the total pack capacity setting it has a setting called total cycle capacity, any idea what they mean by that?