Budget ESC

[jsut210]

I just ordered a Tacon 160 motor (http://www.hobbypartz.com/96m608-bigfoot160-5335-245kv.html) and now I'm looking for a cheap ESC to match it on a 6s longboard setup. I've found these options:

http://www.amazon.com/Neewer-Brushless-Speed-Controller-Scale/dp/B00IZCFZ1E/ref=sr_1_1?s=toys-and-games&ie=UTF8&qid=1434631920&sr=1-1&keywords=150a+brushless+esc&pebp=1434631924840&perid=1R35PH91A8NZV3HR9M2C
http://www.amazon.com/GoolRC-Brushless-Electric-Speed-Controller/dp/B00ZWILJIM/ref=sr_1_43?s=toys-and-games&ie=UTF8&qid=1434632112&sr=1-43&keywords=120a+brushless+esc
http://www.amazon.com/FVT-120A-Brushless-Sensored-Sensorless/dp/B00LWH3YIA/ref=sr_1_59?s=toys-and-games&ie=UTF8&qid=1434632181&sr=1-59&keywords=120a+brushless+esc
Can't seem to find the HK 150a esc in stock anywhere

I'm open to other suggestions, but which one do you guys think would run the best? Thanks!

 

[sl33py]

Looks like a good start!

the FVT looks like an XERUN 120a clone. I have an XERUN i am testing and will let you know my feedback once i ride it around the block a few times.

I'd be cautious if you can't get a programmer for them. Adjusting brakes at least should be part of the plan. I got a CC XL2 to try and the brakes sucked. Not cheap, but i'm sure i'll find a use for it later. I will try it one more time w/ 100% brakes and see if it works better.

I finally ended up just buying the VESC and my first test ride last night - it was AWESOME! great smooth startup and brakes were predictable and usable. soooo impressed.

 

[jsut210]

I forgot to mention that I might be able to get a XERUN 150a used for around $70. I'm thinking thats the one to go with, but I like to have alternatives.

 

[mccloed]

The FVT is a great esc, for the money. Only thing is the brakes are a little sketchy. Definitely get the programmer.

 

[jsut210]

Hmmm... Can anyone comment on the brakes in the XERUN 150a?

 

[torqueboards]

XERun150A is great. I think the brakes are a bit loud similar to the HK150A.

Can't remember though as I don't use it often anymore.

 

[jsut210]

So I went with the FVT 120a assuming that it was programmable without a card. However the manual doesn't mention how to enter programming mode, but does list programmable options. Any ideas? I don't want to have to buy the $20 programmer. I'm used to programming with throttle inputs and motor beeps.

 

[BadWolf]

The only way I know of programming the FVT 120A is with the programming card or the usb-link..

I used my first FVT without changing any of the default settings for a few months and it ran great. What would you like to change?

 

[jsut210]

I'd like to set the braking to 100% and disable the reverse. Also might be wise to mess with the motor timing as well as the initial acceleration (punch)...guess I'm SOL without the card or usb linker.

 

[jsut210]

How risky is it to give this one a shot?
http://www.hobbyking.com/hobbyking/store/__69365__Favourite_Sky_3_Quattro_ESC_USB_Programming_Tool_AR_Warehouse_.html

The correct programmer looks exactly the same...
http://www.amazon.com/Programming-Link-FVT-Brushless-ESCs/dp/B00RXW6DWM

 

[mccloed]

FVT and Favorite are the same. That should work. I don't suggest programming the brakes to 100%. They engage so abruptly and will probably throw you off the board.(I have first hand knowledge of this ) Try 60 or 70%, at first.