transposon
100 W
I am building my first ebike. I purchased a pair of Multi Star 6s 10Ah Lipos for my 1000W 48V conversion kit. I am considering increasing the volts for a little more pep.
HK has 3s 5Ah packs. Could I place two of these in parallel and then connect them in series with each of the 6s packs?
(3s + 3s in parallel) + 6s + 6s for the equivalent of a 15s 10Ah pack? The 6s packs are about 1.5 years old, but only have about 2 cycles on them and have been stored at storage voltage for virtually the entire time. I plan on having low voltage alarms on the balance leads for each pack.
Does this sound safe? I plan on charging all packs to 4.1V/cell so I should be under the 63V cutoff for my controller.
Thanks
HK has 3s 5Ah packs. Could I place two of these in parallel and then connect them in series with each of the 6s packs?
(3s + 3s in parallel) + 6s + 6s for the equivalent of a 15s 10Ah pack? The 6s packs are about 1.5 years old, but only have about 2 cycles on them and have been stored at storage voltage for virtually the entire time. I plan on having low voltage alarms on the balance leads for each pack.
Does this sound safe? I plan on charging all packs to 4.1V/cell so I should be under the 63V cutoff for my controller.
Thanks