The Mighty Volt
1 MW
Doc I had a nightmare today with a battery I was repairing. All the cells were 3.0v, discharged, for safety and also to allow for a full charge.
Kept getting the three flashing lights, so soldered in a new BMS, from the packs either you or Katou sent me two years ago.
Then it worked.
BUT
Last night I discharged my own battery with a CBA III at 3.0Amps to see what capacity it had AND NOW IT WON'T CHARGE and I keep getting the three flashing lights!!!
Kept getting the three flashing lights, so soldered in a new BMS, from the packs either you or Katou sent me two years ago.
Then it worked.
BUT
Last night I discharged my own battery with a CBA III at 3.0Amps to see what capacity it had AND NOW IT WON'T CHARGE and I keep getting the three flashing lights!!!