DasDouble said:
Allex does it matter if I plug the psu first in, and then the charging cable into the bike, or does this harm the contacts somehow? Or is this unimportant, which comes first?
Charging the battery via controller by using charging coil
In order to avoid problems which could be caused by inappropriate usage of device while charging, it’s necessary to follow the algorithm.
Connect the charging coil to power supply (PSU). Do NOT switch on the PSU
Connect the charging coil to the controller in accordance with the wiring scheme
Enter charge settings in accordance with the manual sections 1.1.3 and 3.3.6.
Switch the PSU on
Once the charging is finished – switch off the PSU
Disconnect the charging coil from the PSU
Disconnect the charging coil and controller
Leave the charging mode (press LEFT-DOWN