BigBlock said:quick preview of the ongoing assembly
Care to share the 3D model file for the Fardriver controllers? please?BigBlock said:I finally managed to fit a 20s12p that will give ideal balance between performance and capacity.
Using Samsung 30Q I will end up with a 36Ah pack and 150A BMS
Going with traditional layout will allow to spread the series connection by all 12 cells (150/12 = 12,5A) that should be managed with easier weldable nickel strips (0,15mm) without going with copper or copper + nickel sandwitch.
StevieB-FPV said:Care to share the 3D model file for the Fardriver controllers? please?
BigBlock said:the first shake down went quite well.
Brake: the Magura two pistons bite quite hard but the disks became very hot soon. I believe 160mm is too small for such performance. I have to find out an upgrade to get more consistent braking performance
hope to post a video soon.
HTTR said:BTW, looking at the pictures again it looks like you put the tires on the wrong direction.
RaicceKG said:Hi,
Good Work
But that would be a normal folding like other ebikes. Since your design has a impact of VOSTOK, expected a different one.
If possible work on folding mechanism more.(Just my Suggestion).