HELP Cyclone accelerator

[abeugabeluga]

Hi,

this afternoon I go down with my mtb in my favourite trail a little bit fast so I fall down and crash the cyclone accelerator on a rock.

Nobody have the schematic of cyclone accelerator?

Thank's in advance,

Sergio.

 

[gustavo]

hello the D7 is 1N4148 , it seems to be the only piece bad. bye


http://vcservice.googlepages.com/home
http://bicicletaelectric.googlepages.com/

 

[abeugabeluga]

Thank you yery much Gustavo!

By

 

[TylerDurden]

Looks like C1 is missing... unless it is mounted on the other side of the PCB.

The first LED looks like trouble.

 

[Pete]

If you have no joy repairing the current throttle you can always fit a standard 3? wire throttle if a replacement Cyclone part is stupidly expensive. You will need to splice the 3 wire throttle onto the Cyclone connector but apart from that, simple. Only down side is you loose the battery condition LED's. But it probably isn't a good idea to be relying on them anyway.

 

[abeugabeluga]

Hi,

TD you're right C1 is missing.

Pete thank you for the good idea I replace the cyclone trottle with a crystalyte thumb trottle without led,not so expansive like cyclone and too small so I can adjust the brake lever and gear shifter in the correct place.

By,

Sergio

 

[richardriver]

Hi... you can buy that part in http://www.cyclone-usa.com .. they sell parts for cyclone.