Hello,
Ive been building an ebike with a 250w NCB rear hub german kit and I got it to work just fine. Ive been riding for a couple of days and then decided to change the settings on the display. I went through all the P and C settings only changing a couple of them and after that the bike was no longer working. The screen displays error 03 info. Occasionally when turning it off and back on the screen seems to work displaying the watts ect but the motor would barely budge. Checked the cables and also put back the default settings but same problem. I dont understand as everything was working perfectly fine before I decided to change the settings. Did the LCD screen just brake?? I dont see how I could have affected the motor or any of the other components.. Help
Ive been building an ebike with a 250w NCB rear hub german kit and I got it to work just fine. Ive been riding for a couple of days and then decided to change the settings on the display. I went through all the P and C settings only changing a couple of them and after that the bike was no longer working. The screen displays error 03 info. Occasionally when turning it off and back on the screen seems to work displaying the watts ect but the motor would barely budge. Checked the cables and also put back the default settings but same problem. I dont understand as everything was working perfectly fine before I decided to change the settings. Did the LCD screen just brake?? I dont see how I could have affected the motor or any of the other components.. Help