Hi everybody I’m new to the forum, after searching through google I am really struggling to find any answers or explanation to my problem.
My problem is that I purchased a used ebike from a friend a few weeks ago all was working fine till the other day, I was out riding and all of a sudden my ebike had no power, front hub went stiff and had to push it home.
Once I got home I turned the bike upside down applied some throttle and the hub motor just clicked like it was stuck I tried it again and controller started smoking so I disconnected battery straight away and left the bike for a few days. Once I got round to finding the problem I really didn’t know were to start. After reading some info on google I disconnected the controller from my wheel phase wires and hall wires and wheel was turning smoothly so I thought ok everything is fixed and carried on connecting everything back together but on connection of battery it went bang and bits of molten metal were falling I looked at the battery connectors and they have disintegrated, I have now took all the wires apart again so I don’t wake up in middle of the night to a fire.
I need help plz as I use my bike to get to and from work,
If I have not supplied enough info then plz ask me I will try my best to answer everything
Oh I forgot to mention when the bike 1st stopped working and I tried reconnecting everything when I got bk home the fuse basically had melted and wires that come out of the controller had the outer plastic coating had melted the worst wires are the phase wires.
My problem is that I purchased a used ebike from a friend a few weeks ago all was working fine till the other day, I was out riding and all of a sudden my ebike had no power, front hub went stiff and had to push it home.
Once I got home I turned the bike upside down applied some throttle and the hub motor just clicked like it was stuck I tried it again and controller started smoking so I disconnected battery straight away and left the bike for a few days. Once I got round to finding the problem I really didn’t know were to start. After reading some info on google I disconnected the controller from my wheel phase wires and hall wires and wheel was turning smoothly so I thought ok everything is fixed and carried on connecting everything back together but on connection of battery it went bang and bits of molten metal were falling I looked at the battery connectors and they have disintegrated, I have now took all the wires apart again so I don’t wake up in middle of the night to a fire.
I need help plz as I use my bike to get to and from work,
If I have not supplied enough info then plz ask me I will try my best to answer everything
Oh I forgot to mention when the bike 1st stopped working and I tried reconnecting everything when I got bk home the fuse basically had melted and wires that come out of the controller had the outer plastic coating had melted the worst wires are the phase wires.