bzhwindtalker
100 kW
I've just checked and 180mm should be just enough with no spacers and zero stack headset.
Adam
Adam
Imho chain wheels are not very good in keeping the chain where you want it. Grooved rollers are much better in that perspective. I don't know if this is something to note for your application.bzhwindtalker said:Should be pretty easy to do on the cnc+manual lathe as long as we manage to center the wheel perfect.
bzhwindtalker said:I've just checked and 180mm should be just enough with no spacers and zero stack headset.
Adam
The MT4 doesn't have that problem, but is not dual piston...I use one on the front of my Fighter, with an MT2 on the rear. I will probably go this combo again on the LMX.bzhwindtalker said:We tested mt5 a few times, but we dont like the plastic master cylinders spongy feel and strengt.
bzhwindtalker said:I published some article about the video shoot, with video now live!
https://lmxbikes.com/en/blog/shooting-at-the-salagou-spot-with-fred-austruy-and-the-lmx-64-b10.html
Nope, smaller if it works without an adapter....otherwise I'm happy with 203mm...just wanna know what size.Merlin said:you want bigger discs on the rear?!....
Merlin said:you have deactivated watching the video from websites :wink:
even your own dont work
Video nicht verfügbar
Die Wiedergabe auf anderen Websites wurde vom Rechteinhaber des Videos deaktiviert.
bzhwindtalker said:I published some article about the video shoot, with video now live!
https://lmxbikes.com/en/blog/shooting-at-the-salagou-spot-with-fred-austruy-and-the-lmx-64-b10.html
bzhwindtalker said:Merlin said:you have deactivated watching the video from websites :wink:
even your own dont work
Video nicht verfügbar
Die Wiedergabe auf anderen Websites wurde vom Rechteinhaber des Videos deaktiviert.
bzhwindtalker said:I published some article about the video shoot, with video now live!
https://lmxbikes.com/en/blog/shooting-at-the-salagou-spot-with-fred-austruy-and-the-lmx-64-b10.html
Works fine on my laptop and mobile ?
i couldn't watch it on your site too and then watched it on youtube. i live in kazakhstan.bzhwindtalker said:Ok, strange. I know some songs always get blocked from youtube in Germany ad few other country for some reason. I will check into it.
ferum said:What are the bearings in the swingarm axis?