MAC Motor - Required Connections?

[olemetry]

Hi all. I finally got around to hooking up new 7T 1000w rear geared mac. What connections are required? I get no motor response.

I have the following (right out of the box) connected to the controller: 50V LiPo, motor hot legs, hall sensors, and half-twist throttle (with a 3-position switch? and green button?).

I figured I would keep it simple. Do i need other things connected like e-hand brakes, etc?

Please help. Thanks yall.

 

[johnxsi]

If it's a Cellman kit; do you have another handlebar mounted piece with a red switch on it? (not the throttle)

If so that's the power switch for the controller. Either attach that to the controller, or wire the plug permanently on.

You should be good to go.

 

[mark5]

On the controller to battery wire piece Cellman gives you, the looped back red wire plug needs to be plugged in to turn the controller on. You can also put a switch on that wire. Picture follows I hope: