Mini Hayabusa

[jet8743]

here small pics

and a small vid
[youtube]1elKhAddogA[/youtube]

bike dsp
motor hxt turnigy 80-100-A 180Kv
controller TURNIGY Sentilon100A HV 5-12S
throotle magura servotester special here the link http://www.sinusleistungssteller.de/SG.html
batterie 2* 6s 44v (but impossible to drive to brutal acceleration

 

[Ypedal]

I love it !!! reminds me of my Pukka !

8)

 

[jet8743]

you think the Pukka Electric Mini-bikes GX400C
yes infact the only difference is the power

 

[GGoodrum]

Wow, now that is just awesome! My kids had a couple of these little bikes that are similar and they are still in our garage. In fact, I tripped over one the other day. :lol:

Anyway, beautiful work. Can you give us more detail about the angle drive/gearbox? I love the battery case, just big enough for two 6s-5000 Turnigy, and I guess the controller?

-- Gary

 

[liveforphysics]

lol! Fantastic!

 

[jet8743]

:wink: the bike and the gearbox are from here the link http://www.dpxsystems.com/
but i d'ont know the transmission ration i think 1:2
the controller is fixt under the batterie box

 

[Grinhill]

 

[Thud]

I would destroy every wall in my basment riding that durring the winter!! It looks like a total hoot.

 

[MitchJi]

Hi,

Nice job!

bike dsp
motor hxt turnigy 80-100-A 180Kv
controller TURNIGY Sentilon100A HV 5-12S
throttle magura servotester special here the link
http://www.sinusleistungssteller.de/SG.html

Are there English spec's available for the Sollwertgeber (SG)?

I assume it allows you to connect a Magura directly to the Sentilon controller (used in place of a servo tester and BEC) but does it have any other significant features (like current limiting)?

:wink: the bike and the gearbox are from here the link
http://www.dpxsystems.com/

How did you connect the motor to the gearbox?

 

[liveforphysics]

Pretty cool little setup. I think I might do something like that for a pit-bike at the track. Would you mind taking a side off the gear box so we can see what it uses? Maybe a helical nylon ring gear on a little brass pinion? Maybe both steel with no helix It looks like it's able to handle the power you're throwing at it pretty well, and I know exactly how snorty those motors can be

Looks like they have kits parts here:

http://www.dpxsystems.com/ProductDetail.aspx?ID=199

$329

http://www.dpxsystems.com/ProductDetail.aspx?ID=199

$379

Or the whole bike setup to run from a cordless drill here:
http://www.dpxsystems.com/ProductDetail.aspx?ID=184

$629

 

[jet8743]

specs sollwertgeber

+in max 60v input
-in

P+
PA for throotle 1kohm - 47kohm exempel( magura 5kohm)
P-

GND
+5v to the sentilon controller
PWN

 

[kmxtornado]

I'm discovering this 3 years after the original post! Let's bring this thread back alive! haha, i'm probably the only one posting, but just wanna say this thing is cool! That guy's almost pulling a wheelie! Great build.