eAdrian
100 mW
- Joined
- Apr 8, 2016
- Messages
- 38
Hi
I have tried to find information about getting hydro brakes working with MXUS 3000 v3 on using regular 135 mm dropout frame and 160mm brake disc.
I am very curious how you guys have solved the caliper clearance issue for this motor?
My setup.
Fork <--2 mm spacer--> Disc <--3mm spacer-->Motor giving me 15.3 mm clearance between the disc and the motor.
What will not work:
I read that Clarke Exo Skeletal http://www.bikester.se/clarks-skeletal-hydraulic-disc-brake-skivbroms-set-rear-vit-337827.html might work. But I am not sure.
So please share how you managed to get hydro brakes work on this motor?
Thanks
I have tried to find information about getting hydro brakes working with MXUS 3000 v3 on using regular 135 mm dropout frame and 160mm brake disc.
I am very curious how you guys have solved the caliper clearance issue for this motor?
My setup.
Fork <--2 mm spacer--> Disc <--3mm spacer-->Motor giving me 15.3 mm clearance between the disc and the motor.
What will not work:
- Another extra spacer between motor and disc. Disc touches the cables during rotation
203 mm brake disk will not fix clearance, 60mm ontop 160mm is required.
Buying Magura Gustav. It is just too expensive
Shave of 1-2mm. Walls became to thin and did not hold for the pressure.
I read that Clarke Exo Skeletal http://www.bikester.se/clarks-skeletal-hydraulic-disc-brake-skivbroms-set-rear-vit-337827.html might work. But I am not sure.
So please share how you managed to get hydro brakes work on this motor?
Thanks