How does ASI identify competent and reliable resellers for us?Martin-ASI said:The controller has components that will let out the magic smoke at 100V +/- 10% for hardware variance
I think ASI can help you. But it cost like 200€ per hour. Or at least that is something i have read. Those password / login info from Martin haven't been working over a month now.wakko said:Unless ASI supports abandoned customers I can say that ASI has ripped me off as I have no way of programming my controller. I messaged ASI directly a few days ago and haven't got a response yet.
xenodius said:I bought a devkit from ASI and I have never had problems with my login. But you only need the login for the bluetooth app and support site, you can program the controller by serial without a login via BacDoor even if it's second-hand.
jonnydrive said:Same problem as you guys.
I partially solved using this:
https://www.amazon.com/DSD-TECH-Ada...words=Chip+FTDI+FT232RL&qid=1605681779&sr=8-5
Note: use jumper to select 5volt output signal
With the pc backdoor app (attached).
I also attached the wiring schema, the pins I use to connect TTL to BAC controller are: 17 e 18 for signal and 16 for common ground between controller and PC.
john61ct said:Darn, and thought there was one good dealer on the planet.
How does ASI identify competent and reliable resellers for us?Martin-ASI said:The controller has components that will let out the magic smoke at 100V +/- 10% for hardware variance
I don't need one "near me", willing to pay international shipping
but need them to offer stellar after-sales support remotely over the internet.