First off this is used with 1500w Violamart hub motor kit with the built in controller. The problem is that when you shut down the display there is power still going to the motor. To narrow down the problem I hooked up a 830 display and when the display was off so was the motor. Contacted Violamart and they had some recovery business send me a replacement not sure it was new the long
and short of it same problem as the one that came with the kit. I also installed the replacement sw900 in my other ebike and same problem it would not cut the power to the motor. If anybody has any suggestions I would appreciate any advise.
and short of it same problem as the one that came with the kit. I also installed the replacement sw900 in my other ebike and same problem it would not cut the power to the motor. If anybody has any suggestions I would appreciate any advise.