Forgive me as I have looked everywhere for this. I have a TSDZ2 that have been using now for a few months and love it. I just purchased the programming cables to try the OSF firmware. And before going that way, I am wondering if I can revert back to OEM. I found the files for the TSDZ2 on Eco-Cycles, but they do not show the display files. I have scoured the internet for a few days and even the manufactures website to no avail. Any help would be greatly appreciated.
My setup is an old 1996 Cannondale H300 Hybrid bike
52V 17.5 AH battery
TSDZ2
It has performed very well for me even me. I was even able to accomplish a 104 mile ride on 9-11-2021. with only 1 stop. I feel the efficiency could certainly be better, as the stock firmware lacks the fine tuning I would like. I cant seem to find the sweet spot between too much assist or too little. My route consist of some very steep climbs and not so good asphalt roads. Typical NW Arkansas roads.
Thank you
Todd
My setup is an old 1996 Cannondale H300 Hybrid bike
52V 17.5 AH battery
TSDZ2
It has performed very well for me even me. I was even able to accomplish a 104 mile ride on 9-11-2021. with only 1 stop. I feel the efficiency could certainly be better, as the stock firmware lacks the fine tuning I would like. I cant seem to find the sweet spot between too much assist or too little. My route consist of some very steep climbs and not so good asphalt roads. Typical NW Arkansas roads.
Thank you
Todd