I have a new tsdz2 750w Conversion Kit fitted to my bicycle and I configured the VLCD5 display setting wheel diameter to 700c (I also tried 28, 27, and 26) and I have the units set to miles, but the odometer is reading very high regardless of wheel diameter setting ... I did a trip of 18 miles and the odometer reads 27 miles for the trip. The speed readout seems fine from what I can estimate from experience, but the distance measurements are way off.
Is this a common issue and will the open source firmware fix it?
Is anyone else having this problem? A google search turned up zero results ... maybe I have a faulty display, but it seems to be working fine in every other way except for the odometer.
I also noticed the battery capacity gauge doesn't start to drop until battery is below 60% remaining (measured using another more accurate battery meter), but this is a minor issue compared to the excessively high distance readout.
Is this a common issue and will the open source firmware fix it?
Is anyone else having this problem? A google search turned up zero results ... maybe I have a faulty display, but it seems to be working fine in every other way except for the odometer.
I also noticed the battery capacity gauge doesn't start to drop until battery is below 60% remaining (measured using another more accurate battery meter), but this is a minor issue compared to the excessively high distance readout.