Mundo
100 W
Need help configuring CA-V3
Technical writing is an art....I'm sure many people here fully understand all the ins & outs of setting up a CA-V3s.
First after setting up everything, the bike was sluggish and underwhelming at 36 VDC.
I disconnected the CA and tried again, mush better!
Went through the CA setup again, this time the bike performed little better, still underwhelming.
Many of the steps in the CA-V3 manual are Greek to me........no offence to Greek speakers
There has to be one or two steps I'm doing wrong or not doing.
I have set shunt at 2,11 k-ohms
The batteries I am using are Pings, two 36 vdc 20 ah batteries. Bike is an older Mundo V-2
Pictures to follow in a week or so.
I live in an apartment, so I am doing this build at my father's house.
Additionally, I wired these Ping batteries to 72 vdc with-out the CA, WOW!
Really fast.....
Anyway, suggestion welcome.
Here's some additional details.
Controller Type: 9 fet 30A (36-72VDC, IRFB4110)
Motor Speed: 255rpm loaded @36VDC 10T Upgrade with thermal couple
Rear Wheel Type: 26" Alex DX32 CNC
Throttle Type: Thumb
Ebrakes:
7sp 11T Freewheel
V3 Cycle Analyst Ebike Computer, CA-DPS
Technical writing is an art....I'm sure many people here fully understand all the ins & outs of setting up a CA-V3s.
First after setting up everything, the bike was sluggish and underwhelming at 36 VDC.
I disconnected the CA and tried again, mush better!
Went through the CA setup again, this time the bike performed little better, still underwhelming.
Many of the steps in the CA-V3 manual are Greek to me........no offence to Greek speakers
There has to be one or two steps I'm doing wrong or not doing.
I have set shunt at 2,11 k-ohms
The batteries I am using are Pings, two 36 vdc 20 ah batteries. Bike is an older Mundo V-2
Pictures to follow in a week or so.
I live in an apartment, so I am doing this build at my father's house.
Additionally, I wired these Ping batteries to 72 vdc with-out the CA, WOW!
Really fast.....
Anyway, suggestion welcome.
Here's some additional details.
Controller Type: 9 fet 30A (36-72VDC, IRFB4110)
Motor Speed: 255rpm loaded @36VDC 10T Upgrade with thermal couple
Rear Wheel Type: 26" Alex DX32 CNC
Throttle Type: Thumb
Ebrakes:
7sp 11T Freewheel
V3 Cycle Analyst Ebike Computer, CA-DPS