Search results

Date Relevance Most replies

  1. Scoot440

    Installing PAS sensor on one-piece cranks - looking for ideas

    Okay - that is extremely helpful. I know what I'll be working on tonight. Thanks again, teklektik for all the great advice/info!
  2. Scoot440

    Installing PAS sensor on one-piece cranks - looking for ideas

    Second question: Is there any reason I should not harvest the magnets from my existing magnet disc and make a larger disc? A disc with a 3.5" diameter should accommodate the larger bottom bracket.
  3. Scoot440

    Installing PAS sensor on one-piece cranks - looking for ideas

    Thanks! The larger magnet disc on the PAS 12P Chr may be just the thing. I'll do a little more digging. http://www.ebikes.ca/catalog/product/gallery/image/1542/id/351/
  4. Scoot440

    Installing PAS sensor on one-piece cranks - looking for ideas

    I am installing a PAS sensor on the cranks of a steel-frame Huffy cruiser. What creative workarounds have y'all come up with? Or is there an off the shelf model for the big bottom brackets? Any tips or photos would be appreciated.
  5. Scoot440

    The Perfect Storm

    Thanks! Is your 750 watt motor the same as this one from Lunacycle? https://lunacycle.com/48v-750w-geared-fat-motor-kit/
  6. Scoot440

    The Perfect Storm

    That's a sweet bike! What derailleur and shifter did you use when you added the 7-speed?
  7. Scoot440

    Recommendations: Controller with PAS for Prodeco Phantom X

    I recently picked up a used Prodeco Phantom X (36 volt, 500 watt, brushless, direct drive, rear wheel, throttle only). I have been commuting on it, but the the controller went bad after hitting a bump at speed. Since I'll be replacing the controller, this seems like a good time to add pedal...
  8. Scoot440

    10" wheelwith disc brake mount and sprocket mount?

    They are spoked, but the Razor MX500 and MX650 rear wheels are 10" and have a sprocket and disc. You can often find complete bikes very cheap in your local want ads. http://www.monsterscooterparts.com/ramxmxrewhco.html
  9. Scoot440

    Help with Lambretta Li125 restoration

    Welcome to the forum! I am a big fan of the Lambrettas. Are you planning to convert it to electric power?
  10. Scoot440

    Need advise for Vespa Electric Conversion (Asia)

    The exisiting 3.50-10" tire and tube from a Vespa will fit directly on the the Kelly 10" hub motor. ( I meant "tyre". :P )
  11. Scoot440

    Need advise for Vespa Electric Conversion (Asia)

    The Kelly controllers and 10" hub motors make a good combination for converting a P-series Vespa like you pictured, and the rear disk brake with the Kelly will work better than any Vespa rear brake. The two big challenges in converting a Vespa are in battery placement and creating your own...
  12. Scoot440

    GBK DIY Bottle Battery Kit?

    I had not seen that bag. Thanks! Has anyone used one of these to build their own pack?
  13. Scoot440

    GBK DIY Bottle Battery Kit?

    Does anyone have experience building their own 18650 pack in one of these? Is there a similar but better product out there? Any suggestions would be helpful. I plan to build a 36V 10Ah pack with some of Doc's Makita cells and I would like something that mounts inside the triangle like this...
  14. Scoot440

    Brammo Price Drop

    Check it out here: http://green.autoblog.com/2014/08/27/brammo-offers-massive-price-drop-on-electric-motorcycles/
  15. Scoot440

    Genze by Mahindra, eScooter

    From their website: A deposit today will reserve your spot in line for the introductory price of $2999.00 + tax and delivery within California, Oregon and Michigan only. Residents of other states, contact us at customerservice@genze.com to find out when GenZe will be available in your area.
  16. Scoot440

    Electric Ruckus - Thoughts?

    In the interest of muddying up the waters on this discussion, here are two somewhat similar products to check out: https://www.kickstarter.com/projects/867054068/daymak-beast http://fidomotors.com/ I think the Fido is just plain cool, and the bottom-of-the-line version of the Beast might be a...
  17. Scoot440

    Newbie 500W or 800W front hub motor?.

    The greenbikekit page has a calculator for shipping. The kits you are discussing tend to run about $200 to the US.
  18. Scoot440

    Kawasaki KE100 conversion

    I hear you on the chain noise and the EV experience. I have a 2011 Zero XU (the year they still had a chain) and the chain noise is the defining sound when riding it. If I keep it much longer, I will upgrade to the belt drive system from a 2012. My scooter with a Kelly hubmotor is a much more...
  19. Scoot440

    Motorino XPn Upgrade to Kelly controller

    Not meaning to be a jerk, but I would definitely read a comic book where Electronman meets up with Laserman! If they conquered the evil MotorinoMan, it would be all the better.
  20. Scoot440

    Mobylette - Mxus3000, 120v

    I have a pair of 17" moped rims at the shop. I will do a spoke count this weekend when I am down there. Did Lester not have any? How many spokes do moped rims typically have?
  21. Scoot440

    Mobylette - Mxus3000, 120v

    That should be a cool build! Did you shelve the little Kawasaki? [Never mind - I just saw the other post.]
  22. Scoot440

    Nova Cruz Voloci Scooter/Bike Info

    Thanks for documenting and posting this! I have a Voloci gathering dust in my project pile and this inspires me to get to work on it!
  23. Scoot440

    Copenhagen wheel

    They emailed this morning - the Copenhagen wheel is available for pre-order. https://www.superpedestrian.com/
  24. Scoot440

    Lit Motors kubo

    I like the concept and would gladly buy one if I had need for it - very cool as a delivery vehicle. However, it looks even more awkward when you see it with a rider on it: http://litmotors.com/we-have-a-blog/ For you vintage Vespa fans, see if the front fork looks familiar.
  25. Scoot440

    ICON E-flyer

    Do you think they were inspired by this instructable from 2009? http://www.instructables.com/id/48V-Electric-Flat-Tracker/
Back
Top