Animalector
10 kW
___ Hub drive bitza - First e-bike attempt pages 1 and 2 ____
___ Monster GREYBORG BUILD PAGE 2 through 8 with Testing Vids on Page 8 _____
___ Avanti D8, 750W BBS02 Mid Drive Begins Page 9 ____
___ Norco Shore BBS02 750W, 48V 18650 pack Page 12 ____
https://endless-sphere.com/forums/viewtopic.php?f=6&t=38846&start=275#p1184912
___ Hub Motor Kick Scooter Build up Page 13 ____
___ Norco Team DH Downhill BBS02 Frame Pack Page 14 ____
https://endless-sphere.com/forums/viewtopic.php?f=6&t=38846&start=325#p1219745
Good afternoon,
I've been reading through these forums for a few months now, just taking note of other people's builds and information. I jumped in and got a kit to bolt onto my old dual suspension MTB.. I bought a Conhismotor 1000W hub motor kit. So far i have been impressed with what was included, how it was all packed and overall service in general. For the money so far so good.
I only received the battery yesterday so not everything is complete, however i have managed to hook it all up and give it a test throttle twist (no ride yet)
Here's some pics of the build so far.
Look forward to being a bit more of an active member on the forum.
View attachment 3
View attachment 1
[youtube]bP_KZ5iVscU[/youtube]
Current Issues:
Warped Disc - possibly even the threaded disc bracket. Also the caliper 'almost' fouls on the motor cover, and therefore I needed to add spacers between hub and disc. Could be an issue under heavy breaking.
Bag and Bracket battery and controller
TODO: Fit pedals, new shifter 7sp shimano altus/acera, matching derailleur, (unable to use largest sprocket, derailleur fouls against motor housing)
Look forward to some comments. Thanks
Andy
___ Monster GREYBORG BUILD PAGE 2 through 8 with Testing Vids on Page 8 _____
___ Avanti D8, 750W BBS02 Mid Drive Begins Page 9 ____
___ Norco Shore BBS02 750W, 48V 18650 pack Page 12 ____
https://endless-sphere.com/forums/viewtopic.php?f=6&t=38846&start=275#p1184912
___ Hub Motor Kick Scooter Build up Page 13 ____
___ Norco Team DH Downhill BBS02 Frame Pack Page 14 ____
https://endless-sphere.com/forums/viewtopic.php?f=6&t=38846&start=325#p1219745
Good afternoon,
I've been reading through these forums for a few months now, just taking note of other people's builds and information. I jumped in and got a kit to bolt onto my old dual suspension MTB.. I bought a Conhismotor 1000W hub motor kit. So far i have been impressed with what was included, how it was all packed and overall service in general. For the money so far so good.
I only received the battery yesterday so not everything is complete, however i have managed to hook it all up and give it a test throttle twist (no ride yet)
Here's some pics of the build so far.
Look forward to being a bit more of an active member on the forum.
View attachment 3
View attachment 1
[youtube]bP_KZ5iVscU[/youtube]
Current Issues:
Warped Disc - possibly even the threaded disc bracket. Also the caliper 'almost' fouls on the motor cover, and therefore I needed to add spacers between hub and disc. Could be an issue under heavy breaking.
Bag and Bracket battery and controller
TODO: Fit pedals, new shifter 7sp shimano altus/acera, matching derailleur, (unable to use largest sprocket, derailleur fouls against motor housing)
Look forward to some comments. Thanks
Andy