DaKashmir!
10 mW
- Joined
- May 21, 2020
- Messages
- 20
Help please! I don’t know anything about the technical jargon I have read in this thread so bear with me. I have a QS 205 v3 motor paired with a SVMC 72200 Sabvoton powered by a 72v 50ah 300a continuous BMS. I purchased the bike from someone who built it for me. He told me he would provide any technical assistance I needed, but he won’t return any of my messages. So this is what’s happening, I charge the battery to 84v and when I ride it for a while and the bolts drop down below 80 it shuts down. Won’t come back in until I plug it in and give it a charge. My lack volt Is set to 60 and my current limiting voltage is set to 62. Any ideas on why it shuts down around 79v?
Another issue I have is the H6 TFT LCD Display, the only thing that works on it is the voltage read out. 00.0 RT MPH, I can go through 0-5 on the assist but it does nothing. Power is always at 0. Error message at the bottom reads [E : a] Failed to receive. Any ideas on that?
Thanks in advance,
Rick
Another issue I have is the H6 TFT LCD Display, the only thing that works on it is the voltage read out. 00.0 RT MPH, I can go through 0-5 on the assist but it does nothing. Power is always at 0. Error message at the bottom reads [E : a] Failed to receive. Any ideas on that?
Thanks in advance,
Rick