Hi guys, sorry if this a noob question but I am a newbie assembling my first ebike.
I have a Kelly KLS7212NT and a 3000w motor with 3 hall sensors (also a 27,4Ah 60v battery). A friend made the initial config for me and gave me all pre assembled.
Everything was fine until the two months mark of the ebike. Now whenever I'm riding, after 3/5mins the throttle cuts off and the controller makes 3,4 beeps. It's weird because if I shut down the bike and start it again immediately it beeps again, but if I wait 10minutes or so I can ride another 3/5mins.
What could be the problem? I attach a screenshot of the controller config.
I have a Kelly KLS7212NT and a 3000w motor with 3 hall sensors (also a 27,4Ah 60v battery). A friend made the initial config for me and gave me all pre assembled.
Everything was fine until the two months mark of the ebike. Now whenever I'm riding, after 3/5mins the throttle cuts off and the controller makes 3,4 beeps. It's weird because if I shut down the bike and start it again immediately it beeps again, but if I wait 10minutes or so I can ride another 3/5mins.
What could be the problem? I attach a screenshot of the controller config.