I have an Enerdel 12S pack I bought from forum member Major a year or two back. It has been a great battery! Over the summer I stupidly left my two Celllog 8S's plugged in. The battery is totally drained. The cells are reading less than 0.5V on my Thunder 1220 that I have been using to recharge this battery. When I plugged that in and push/hold the charge button it brought up the charge screen and showed 4.xx V, and then began to slowly slowly climb. If I push the button again, it errors with low voltage.
I am not sure what to do, but I figured I would plug it in and start the charge cycle (one push/hold of the button) and see if it will slowly charge. It has been plugged in for about 30-40 minutes and is now up to 5.96V and slowly increasing. Will this work if I leave it plugged in for a long time? Is there anything else I can do to recover the battery?
-Tom
I am not sure what to do, but I figured I would plug it in and start the charge cycle (one push/hold of the button) and see if it will slowly charge. It has been plugged in for about 30-40 minutes and is now up to 5.96V and slowly increasing. Will this work if I leave it plugged in for a long time? Is there anything else I can do to recover the battery?
-Tom