Recent content by jatgm1

So, just as a thought, it seems someone in the reviews on Amazon has used a bit of wood, hot glued them onto aforementioned wood, got some like 12/14 solid Romex ground wire to connect all four cells on both sides and soldered it on, one positive one negative. I thought maybe I can do that three...

So how can someone easily connect the batteries in the holder in parallel, on each battery holder, then connect three in series? (12ish volts) What kind of connector is on this and how do I wire it together properly? They just look like pins of some sort, can I order a connector for this so I...

I figured if I can get a battery holder for 18650 cells, like the plastic ones that you can add and remove batteries from easily, it would make them easier to replace if they fail and I can just stick them in the trunk and loose the original pack underneath, and if I get a bms with Bluetooth I...

Well I'm trying to figure out if I can get a Nissan leaf, get 30 12v 64ah packs, and make that work as a 350v pack, maybe by either reprogramming the controller or trying to find a custom one that will work for the leaf with whatever pack I put in it.

So I'm trying to understand how one could make a 12v 64ah lithium pack with 18650 cells that's 64 ah. Could someone please send me something to help understand how the cell arrangement would work with 18650 cells I want to learn how to make a pack.

is there any way i could add something like a flipsky controller to a m365 to make it easier to change settings and eliminate the entire speedometer and everything? i was thinking if i could set the speed to 18 like my m365 is at now using custom firmware from some app and some software i ran...

Long story short I'm trying to get a mi365 scooter and add another battery pack to give it as much range as possible. I'm looking at the 12.8 ah version and want to get a battery that is as identical as possible with a built in bms, to get the best range possible and keep it safe. Any...

I know, but I think i would be better off at first with a charging board. Simpler for now. Mostly stock connections, other than the wiring harness. It's an interesting setup but I am going to stick to a stock setup as much as possible. Save some effort and make things more easily hotswappable...

That is an interesting setup, would I be able to leave the balancing wires in the parallel charging board while it's used? Like while the batteries are in use? There's no reason not to right? I mean as long as the output plugs are not plugged into the charging board right? Just to make sure.

Okay, can I use this charging board http://www.hobbyking.com/hobbyking/store/__14856__Hobbyking_Parallel_charging_Board_for_6_packs_2_6S_XT_60_.html with these batteries? http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=18631 it says 2200 or more, also how would I plug it in...

I'm glad you all care so much about others safety, however the reason I am on here is to find out the safe way to do this, so by simply saying "go buy one", the result is that I do not gain any such knowledge, whereas if you were to make a suggestion of how to do it safely and which materials to...

my question was simply if there was a law forbiding what i was riding from the road for any reason or if it fit into any category that was illegal. if its not illegal then ill take it to court if they wanna make an issue. itll be dropped. and if they pass a law against it afterward, ill find...

oh yea, and i wanted to use a 36v geared hub motor. unless anyone knows of a 48v geared hub motor around.

im trying to build a 36v lipo pack, would 10 or 12 of these cells work? http://hobbyking.com/hobbyking/store/__9172__Turnigy_5000mAh_2S_20C_Lipo_Pack.html and is there a charger that will be able to charge and ballance all these cells at once? on a 110v outlet? and preferably act as a bms as...

silly police.