Search results

Date Relevance Most replies

  1. medusa569

    Still throttle wiring problems

    Well after 5 months it's finally running !!! Hallefrickinlujah. Apparently for this kit 36/48 volt 500W The whole problem is the wiring for the throtlle and the controller setup. I‌ used the included twist throttle which I may alter or switch out in the future but for now I just hope there is...
  2. medusa569

    Still throttle wiring problems

    Yes the switch is turned on as evidenxed by display.
  3. medusa569

    Still throttle wiring problems

    Followup...sucessfully connected 5 wire twist throttle so at least I know that I‌ was able to achieve display and battery voltage. However the motor showed no signs of life. It may have something to do with the white wire that has no mate. Onother site identified white hall sensor wire as a temp...
  4. medusa569

    Still throttle wiring problems

    Hey Tommy! I'm finally checking in again as I laid out my components on a work board, changed some connectors etc. I finally found the supplied twist throttle to see if something was missing would recitify itself with the 6 wired throttle. Well...nothing changed. No power showing on throttle...
  5. medusa569

    Still throttle wiring problems

  6. medusa569

    Still throttle wiring problems

    Yes the first pic IS what I have. Let you know how it goes.
  7. medusa569

    Still throttle wiring problems

    Hey tc: So when you say jump the power wire its as I described...basically joing tother the red postive power and the yell throtte wire together than then add on connector for battery connection? I don't know what green wire you are referring to. I‌am NOT uing the 6 wire throttle as it is a...
  8. medusa569

    Still throttle wiring problems

    Well I‌tried again today first 3 wires standard for throttle connected and the final yellow throttle wire I attached to the burgundy/brown wire on controller throttle connector. Still no luck... It seems as if something needs to be done with the remaining 2 controller throttle wires.....Do I‌...
  9. medusa569

    Still throttle wiring problems

    First my controller does not have the same wiring as your diagram. There is no electric lock nor a blue wire on the throttle. Throttle has red,black,green and yellow. Secondly my controller is rated 36/48 volt. Thirdly do you mean that the yellow should be connected to the large red power wire...
  10. medusa569

    Still throttle wiring problems

    sure
  11. medusa569

    Still throttle wiring problems

    OK since I couldn't figure out the 6 wire throttle I bought a 4wire throttle ( 3 + yellow power wire for LED) . Is the yellow for throttle high voltage or low? I see by some videos it says to connect straight to battery but I can't figure out how to do that unless i connect the throttle yellow...
  12. medusa569

    Bench Testing controller with psu

    Yea I opened it up and saw no other extra wire. If I‌ had installed it the way the kit supplier sold it the 6 wire throttle connection does have a power wire that would allow te led readouyt to function but then that still wouldn't be the power up for the controller I think. I‌ would think...
  13. medusa569

    Bench Testing controller with psu

    I'm trying to follow the KISS formula. I‌ only wanted to be assured that the controller had power when connected to a battery. I‌ didn't want to test the whole setup. I've read that most of the chinese cheapies have no thin red wire for ignition. The higher priced ones WILL have it. The one...
  14. medusa569

    Bench Testing controller with psu

    Since I am having to mix and match items that are not in "kit" I'd like to simplistically test the controller without my full fledged battery. I've already fried the connectors of 1 controller twice. Scarey. I'd like to use a minor power source so a psu power source (‌maybe at 12 volt) to see...
  15. medusa569

    Voilamart front hub motor normal?

    A misunderstanding.. I‌was attempting to ride this Powerless. No phases , no nothing. Yes I chcecks the brakes as that would be an obvious thing. I‌did remount it and I‌ suspect that it may have something to do with that. I‌was under the impression and after researching that there must be some...
  16. medusa569

    shimano rear derailler 592 mounting

    It's always nice to know there's been a few more head scratching outside of my own. :D
  17. medusa569

    Voilamart front hub motor normal?

    After someone mentioning the voilamart motor kit I bought one. I assumed this poster was speaking from experience but now I regret buying it. what a waste of money on more than one consideration. Maybe it's just my legs but I've ridden for many years a 9c DD front motor with no problem in...
  18. medusa569

    shimano rear derailler 592 mounting

    Yes Rich got it right. This is a new style unlike my old one and I‌ finally saw the nub on the back near the mounting screw of the new derailler . They sure could stand to increase that nub a few more MMs. So consequently it bolts on at a very severe downward angle when putting it on. The...
  19. medusa569

    shimano rear derailler 592 mounting

    recently bough this rear derailler and am having a dickens of time getting it set up. think it has what called a shadow technology and an extra pulley wheel. t doesn't seem to be positioned right but can't see anyway but one to mount it onto the bike. he problem is the unit itself seems to...
  20. medusa569

    Voilamart Controller Mod

    The throttle wire connections are my problem as well. The controller 36volt kit) has 5 wires. I am assuming the red,black 5v)and white (signal) are the thumb throttle but what to do with the brown and yellow. Did you solder those together? Also did you run with or without hall sensors?
  21. medusa569

    Wiring an on off switch into unmarked Chinese controllers

    I'll pick #3 which is most likely what my other controllers likely have had installed. Since I disconnect the battery after each use I just don't want battery current when I don't want it and presently I have no other accessory that deals with on off functions. Just throttle. controller...
  22. medusa569

    Wiring an on off switch into unmarked Chinese controllers

    OK so since my old motor bit the dust I bought the cheap kit from voila ( amazon). It was a 500 watt motor and I have no instruction sheet. I can identify the sensor wires, the power and the phase wires. I think I can identify the sole 3 wired throttle connector and the rest is Greek to me...
  23. medusa569

    Scammers hit this site?

    Veeery suspect.
  24. medusa569

    Scammers hit this site?

    I wanted to get feedback on whether faceless/anonymous scamemrs have scammed anyone else here. These would be "members" that are or cannot any longer be identified as members. I was contacted through a third party about someone allegedly having those 9C side plates I wanted but my gut is...
  25. medusa569

    9CJ210061615023 9C FH motor

    Yea I know about the economics but since the manufactuers are still pushing out product what's the big deal about mailing out some aprts. There's no loss to them and frankly I'd shy away from companies that don't offer parts ( if I have a choice) Those companies that sell their products should...
Back
Top