Search results

Date Relevance Most replies

  1. D

    Adaptto Mini-E/Max-E Owner's Thread

    Thanks for hall info!! I have hydraulic brakes as well and will probobally run into same problem your having. So either I don't use back brake which I am not at the moment anyways and put a lever in just for regen. Or if this is ok use wuxing thumb throttle for variable regen, and also use...
  2. D

    Adaptto Mini-E/Max-E Owner's Thread

    Can you guys please post (or point me to location) some added info on adding hall+magnet to break lever to make use of variable regen with adapto controller. What kind of hall is used? Any pictures would be helpfull. I'm thinking of using this option, or wuxing thumb throttle for left side...
  3. D

    Methtek HVC/LVC working

    Thanks very much arlo. Seems like checking breaker and throttle should be pretty simple and straight forward. I'm pretty sure at least 1 of my 6x4S boards is no good making the whole system (battery pack 24s4p with 8s batteries) flawed. Unless I can find or repair some new 4S boards. ...
  4. D

    Methtek HVC/LVC working

    I want to make sure my current setup is working properly. Above methods recommends to send boards back to him for testing. At the moment that's not quite an option. Anyone have some advice on how to check each board, check throttle retard is operational, and of course HVC breaker. Thanks for...
  5. D

    White Arrow

    Thanks for reply Just to make sure I get this. -You use dc-dc converter with switch, taking power of battery pack. Connect to Kelly controller through J2 wire 1 power input and J1 wire 1 Output. Then before you turn on main pack you turn on dc-dc converter and then proceed to turn on pack. am i...
  6. D

    White Arrow

    hey black arrow. nice build!! been doing some reading on kelly controllers and i was wondering how you made it CA compatible. are you using high current model with external shunt? the ones ebikes.ca sell? also what are you using for on of switch? is it inline with main power to controller? is...
  7. D

    Phasor/cro /meth24fet/fans/ca3/HVC LVC don't do what I do!!!

    sounded tempting till i glanced over and saw you live in UK i could buy new motor and controller for price of ticket. :) sucks about arm. bike accident?
  8. D

    Phasor/cro /meth24fet/fans/ca3/HVC LVC don't do what I do!!!

    yea neil, ive done all test with and without. later on ill check halls again didnt check since ca shorted again. though same symptoms as first time so im pretty sure at least on hall is damaged. thanks for the help neil i appreciate it!!
  9. D

    Phasor/cro /meth24fet/fans/ca3/HVC LVC don't do what I do!!!

    tested controller with lyen tester hit throttle everything seems to be fine... the only reason i think this is more than just average hall/phase problem is because of CA3 screen going blank 2 times. first was caused by unplugging fans and shorting dc jack, and two days ago with new ca testing...
  10. D

    Phasor/cro /meth24fet/fans/ca3/HVC LVC don't do what I do!!!

    neil problem is electrical, i took covers of again and placed again. wheel spins freely when not plugged in. i think phase wires are somehow shorted with thermistor....
  11. D

    Phasor/cro /meth24fet/fans/ca3/HVC LVC don't do what I do!!!

    Oh and that one picture with the crutches, yup that happened on bike.
  12. D

    Phasor/cro /meth24fet/fans/ca3/HVC LVC don't do what I do!!!

    Rodney halls used where on freewheel side on mine. And thanks. you already sure halls are the problem? On my motor one of halls that wasn't being used had severed wire right by stator, this either happened from when I shorted my fans and ca. Or from simple rubbing on the magnets. Non used...
  13. D

    Phasor/cro /meth24fet/fans/ca3/HVC LVC don't do what I do!!!

    Thanks for the advice pendragon. Problem is bigger. Just fried another ca3!!? only thing other than controller hooked up to CA was temp sensor, which was working. There's got to be a short somewhere. I'm fuckin over it. Gonna take motor and send to methods like he originally offered. Thinking it...
  14. D

    Phasor/cro /meth24fet/fans/ca3/HVC LVC don't do what I do!!!

    Downloaded photo bucket and uploading pics. Give you guys link in a bit. Back with bike got hub to spin with a lot of patience took both covers back off and started over. On to next problem.... Halls are toggling between 0-5V But when I plug in phase wires wheel stiffens up again, a bit of...
  15. D

    Phasor/cro /meth24fet/fans/ca3/HVC LVC don't do what I do!!!

    Yea Neil if it was about 5-6mm wider it would be perfect. Anyone who has taken of cromotor covers know, once I put covers back on if installed correctly should I be able to spin axle easily by hand? Or for that matter any hub motor. I applied a bit more pressure with gear puller, a few taps...
  16. D

    Phasor/cro /meth24fet/fans/ca3/HVC LVC don't do what I do!!!

    Damnit... Not sure what to do photos are set to public. Maybe have to be on Facebook to view??.. To complicated anyone know of easier way to upload pics. No computer at moment just iPad.... Still working on bike just finished closing hub back up. Wheel is back in dropouts. Halls checked prior...
  17. D

    Phasor/cro /meth24fet/fans/ca3/HVC LVC don't do what I do!!!

    Thought I already put in link... Here you go https://www.facebook.com/fred.einhorn/media_set?set=a.10151913762075690.1073741826.743460689&type=3 Set album to public, give me a heads up if you can't view
  18. D

    E-S Phasor Electric Bike Owners

    Been away for a bit. Posted updates in another thread as it pertains to many components. Anyways here is linkhttp://endless-sphere.com/forums/viewtopic.php?f=3&t=54551 Hopefully I'll be up and running again by tonight!!!
  19. D

    Phasor/cro /meth24fet/fans/ca3/HVC LVC don't do what I do!!!

    Pictures! Missed some of heat sinking stuff. Will post more
  20. D

    Phasor/cro /meth24fet/fans/ca3/HVC LVC don't do what I do!!!

    Haven't posted in a bit but this is kind of connected to little bit of everything. Just like posted above. 2nd build, frocked up everything I could in first :D that's another story. So phasor-cycles.com frame, methods HVC/LVC [urlhttp://www.methtek.com/category/battery-protection/][/url]and...
  21. D

    High voltage controller key switch

    Ok voltage rating. Do I have to find a product whose rating is minimum 100V DC. Or can I just look at AC ratings anywhere over 100V good? Minimal current 1Amp? ,2amp? Most switches don't show rating above 48VDC Just current cappabillity dropping as voltage goes up.
  22. D

    High voltage controller key switch

    On a 100v setup with methods 24 fet. I want to swap controller on off button to key switch. Can I use any 125Ac switch, how many Amps should it be rated for as well. These are not main power lines just controller on off!! (Still showing pack voltage on multimeter) Would something like this...
  23. D

    Cycle Analyst V3 preview and first beta release

    Can CA3 be used as an on off for controller? Can a switch be used with one of aux cables on CA? Or system shut down thru CA itself? Sorry if this has already been addressed. Thanks for any answers
  24. D

    Cycle Analyst V3 preview and first beta release

    Yea it's beta20 ill have to buy one.... To bad I can't leave build all done.. Leaving town for2 months tommorrow....
  25. D

    E-S Greyborg owners' pics

    Looks bad ass stevil! Where did you get those fenders???
Back
Top