Search results

Date Relevance Most replies

  1. B

    Parallel Harness

    If I setup those in batteries in parallel I would have 20-30C for 10000mAh, so I would be pulling 200-300A right? Is the VESC able to handle this or am i thinking about this wrong? I dont want to do this and end up screwing my board up. Even with the XT90 connectors for parallel, it would go to...
  2. B

    Parallel Harness

    If i wanted to use two 9s batteries in parallel would i need XT90s? The batteries would be 3 3S1P in series with 20-30C output.
  3. B

    Parallel Harness

    If I wanted to put two of these batteries in parallel should i use an XT90 Y harness or an XT60 Y harness? http://www.ebay.com/itm/281865122600
  4. B

    Can anyone edit this 3D print file for a 4 battery enclosure

    I am using a rayne nemesis and it has a deep tub concave. It is 1.5 cm difference from the edge to the bottom of the concave which is about the middle 14cm of the board. I need an enclosure with inside space of 33cm x 16cm x 3.5cm. So the concave will not really make a difference and I will also...
  5. B

    Can anyone edit this 3D print file for a 4 battery enclosure

    I would like to use this enclosure but I am using 6 batteries. If anyone is good with 3D file editing can you please comment if you can try to edit this file. I contacted the original maker and he was going to make me one but I haven't heard back in a month. I just need it extended to fit 6...
  6. B

    Enclosure for batteries (3d print/other) PLEASE POST LINKS

    I am looking for a case that is long enough for 6 zippy batteries. If dimensions would help, something around 30-35cm by 16cm by 3.5cm. If anyone knows of one that can be 3d printed or a site that has good containers that can be converted into enclosure please post them here. Anything helps!
  7. B

    Need a good wattmeter

    Anyone who has/ knows of good accurate watt meters that will let me know when my batteries are running low, post the links. Most of the ones I see on here people say fail after a short period of time or are not accurate. Would love to know who has decent ones and where I can get them.
  8. B

    Enclosure for batteries (3d print/other) PLEASE POST LINKS

    What do you mean I need a raft for the lid?
  9. B

    Enclosure for batteries (3d print/other) PLEASE POST LINKS

    Are you still working on it? Or not doing it, just wondering so I can look elsewhere if it is too challenging with the concave of the board.
  10. B

    Enclosure for batteries (3d print/other) PLEASE POST LINKS

    That would be awesome. This board may be trick though, the bottom is not flat. It is 26 centimeters wide but is only flat for about 13 centimeters in the middle and then curves. The difference at the edge is 1.5 centimeters. The battery enclosure can be 20x34x4 centimeters. The 4 centimeters is...
  11. B

    Enclosure for batteries (3d print/other) PLEASE POST LINKS

    I'm looking for a good 3D printable enclosure for a one motor setup, VESC, 6 2S3P batteries. If anyone has links for good ones please send them. Needed for a rayne nemesis deck, looking preferably for ones in similar size or design to the boosted enclosures. Please send any links you may have...
  12. B

    Best Gear Ratio

    Does it matter how many teeth the pulleys have if the ratio is the same. only asking because I purchased a 20T motor pulley awhile back.
  13. B

    Best Gear Ratio

    Ok I will go with that, how do I know which belt will work for me though? Also do either of you have any old belts/ pulleys you would be willing to part with, I am having trouble finding ones that aren't coming out to 60$+ for everything and would like to know that it would work with abec clones...
  14. B

    Best Gear Ratio

    I am not sure how to go about picking the best gear ratio. I have a Turnigy Aerodrive SK3 - 6364-245kv Brushless Outrunner Motor and am using a 9S2P setup for batteries and 83mm Flywheels. And info helps.
  15. B

    4mm bullet for 5.5mm VESC connections

    My motor has 4mm bullet connectors for the connection to my esc. I am using a VESC however which has 5.5mm female bullet connector leads. I am wondering what is the best way to make this work, cut the 4mm connectors and replace them with 5.5mm, or is there an adapter I can purchase to help with...
  16. B

    Loaded Dervish/dual6355-190/dualVESC/90mmFlywheels/nunchuck

    What was the voltage cutoff originally and what did you change it to?
  17. B

    DIY Boosted inspired electric longboard

    So what would you advise for a wattmeter with using the VESC?
  18. B

    DIY Boosted inspired electric longboard

    So would I be alright with using XT60 connectors and not XT90? And how do I go about connecting the 10AWG to the watt meter that is using 12AWG? Will just using a simple XT60 connector work in this case?
  19. B

    DIY Boosted inspired electric longboard

    I am going to go with 8AWG just to be safe, and when I spoke with someone else they advised I use 8. I am concerned though with using 8AWG if I can still use a watt meter that has 12AWG or would I have to remove the wires and solder on the 8AWG...
  20. B

    Electric Longboard Build Help

    q
  21. B

    DIY Boosted inspired electric longboard

    I am planning on soldering my batteries to XT90 connectors and making a harness that will connect the 3 batteries together to one XT90 port so I can take the batteries in and out of the series with ease. And put the two series packs together with this...
  22. B

    DIY Boosted inspired electric longboard

    The VESC can reach 250 for a few seconds but my motors max current says its 70A. But I think the VESC protects the motor correct?
  23. B

    Electric Longboard Build Help

    If I purchase 3 of these http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=10993 and have 2 of the 3 3S batteries connected with this all the time, and keep the last one for when im charging the batteries, could I use 2 of these...
  24. B

    Electric Longboard Build Help

    I am now thinking a 10,000 9S2P battery (2 9S1P 5A/h) but I am having trouble finding a decent charger for up to 10S batteries, I am putting the 9S batteries together with 3 3S batteries so I don't even know how the pins would work with a balancing cable. Are there other cables on the batteries...
  25. B

    DIY Boosted inspired electric longboard

    Using this as an on off switch, would it also work as a fuse in the case of a short? http://www.ebay.com/itm/200-AMP-12V-DC-CIRCUIT-BREAKER-REPLACE-FUSE-200A-12-24V-DC-FAST-FREE-USA-SHIP-/390474856510
Back
Top