HighHopes
10 kW
- Joined
- Mar 28, 2013
- Messages
- 929
It's for a 144V pack in the 10 to 30kWh range.
I put that profile on there just to sort of show what is expected of the hardware design and why. It's basically just a generic profile. The actual profile hasn't been determined yet but I suspect it will look similar in the end. It's all software programmable so you can change it as you need
as an aside, my preferred method of energizing a battery is to apply 1000V microsecond pulses of potential (voltage without a ground reference) at the resonant frequency with ideally 0 amps. .. but that's a story for another day 8)
I put that profile on there just to sort of show what is expected of the hardware design and why. It's basically just a generic profile. The actual profile hasn't been determined yet but I suspect it will look similar in the end. It's all software programmable so you can change it as you need
as an aside, my preferred method of energizing a battery is to apply 1000V microsecond pulses of potential (voltage without a ground reference) at the resonant frequency with ideally 0 amps. .. but that's a story for another day 8)