How would one go about making a fast outboard motor with the 150cc turnighy motor?
cheetahgod 1 mW Joined Dec 1, 2017 Messages 16 Dec 1, 2017 #1 How would one go about making a fast outboard motor with the 150cc turnighy motor?
amberwolf Administrator Staff member Joined Aug 17, 2009 Messages 40,859 Location Phoenix, AZ, USA, Earth, Sol, Local Bubble, Orion Dec 1, 2017 #2 .nm.
Chalo 100 TW Joined Apr 29, 2009 Messages 12,539 Location Austin, Texas Dec 2, 2017 #3 I'd start by retrofitting a big trolling motor and seeing how well that works. If possible, keep all the electrical components above water.
I'd start by retrofitting a big trolling motor and seeing how well that works. If possible, keep all the electrical components above water.
cheetahgod 1 mW Joined Dec 1, 2017 Messages 16 Jan 13, 2018 #4 Do you think a turnigy c8085-170 or 80100 would be better for a small boat?
M MotorboaterBen 1 mW Joined Mar 5, 2018 Messages 16 Mar 29, 2018 #5 Lower kv and higher torque....unless you're using a surface-piercing prop on a hydro setup