chrisflysit
10 mW
- Joined
- Mar 17, 2020
- Messages
- 30
Yes I did cut out the bottom of the tank to make room for the battery pack.
chrisflysit said:Here are the drawings and dxf file for the motor brackets. They will still need some work once cut out. Taping (two holes) and drilling mostly. The left bracket need a bit of material removed (2mm) at the lower frame mount to get them motor square on a 2017. We had to add 1/4 spacer here on the 2006. I used scrap tubing between the mounts at the swingarm and a smaller tube at the front. We have them on a 2006 and 2017.