Hey guys,
My Max-E has arrived and installed over the weekend. The motor I am using for now is the Turnigy C80100 – 130kv outrunner sensored. Just having some issue with the controller that I’m hoping someone can help out with..
Autodect completes successfully. Motor runs ok with no load – very loud though. When riding the bike the motor gets much hotter than it should. Looking through the advanced settings on the adaptto, there is a setting for HallOffset (advanced setup 3/5) which Autodetect has set to 180 degrees.
Is this setting the same as hall sensor spacing? In which case it should be 120 degrees as that’s how I have them positioned in the motor..
Cheers,
Alex